Stall, gears, random materials

**97formulaws6** · 05-30-2007, 08:27 AM

2002 collector edition brochure $10.00

1999 firehawk brochure $10.00

2002 firebird/formula/trans am brochure $10.00

I have a nice set of low mile GM 3.23 gears $50.00

Older vig 4000 stall, LS1 (heavy duty 6 bolt style) can just use stock 3 holes though less than 15,000 street miles on it. works perfect hits HARD ! to much for my bolt on car in my old age going smaller , NOTE you better have drag radials and a credit card to buy a 12 bolt soon. $350.00

3 inch slp bend(adaptor) to put loudmouth on a 94-95 f-car. $10.00

95 LT1 fans in unbroken housing both tested and working $50.00

stock panard rod from 02 $10.00

set of 99 formula heads stock complete (33k)$100.00

Everything is plus shipping

**Ls1fury** · 05-30-2007, 05:36 PM

Intrested In The Stall!!!! How Much To Ship Bro Hit Me Back Up!!

**97formulaws6** · 05-31-2007, 06:19 AM

I would think $30.00 should get it to you ups ground.

**mghawk57** · 06-01-2007, 06:40 AM

How much shipped for the panard to 59105?

**97formulaws6** · 06-01-2007, 06:57 AM

32.00 to ship to 59105. crazy I checked it 3 times ups dhl and fedex thats the cheepest.

**mghawk57** · 06-01-2007, 08:02 AM

Thanks - Looking to pay less (not your fault) - I have a aftermarket one that is making a buzzing noise and want to change it out to make sure that is the noise.Thanks again for replying

**97formulaws6** · 06-01-2007, 08:54 AM

I have seen that before. I would take it out inspect the bushings, replace if needed. Grease them well with marine grease and reinstall checking to be sure its all tighted down within spec.

**mghawk57** · 06-04-2007, 04:20 AM

Thanks for the information - The noise seems to be coming from the rotating socket on the end not from where the bolt goes through the hole/bushing.

**95GreenZ28** · 06-13-2007, 08:37 AM

Still have the stall? WHat is your bottom dollar shipped to 79109?

**97formulaws6** · 06-13-2007, 09:39 AM

$350.00 is the bottom line shipped this was a 995.00 converter !

**95GreenZ28** · 06-13-2007, 10:27 AM

Ok I will be in touch soon. Paypal?

**97formulaws6** · 06-13-2007, 12:55 PM

yes sir I have paypal.

**95GreenZ28** · 06-14-2007, 07:45 AM

So would that stall work good with a stock tranny and the msv4? I dont know how long my 10 bolt would last haha

**97formulaws6** · 06-15-2007, 10:03 AM

my stock 10 bolt have 130k on it but I have a TA cover and apr cap bolts. I do belive its the key to keeping them alive.
Yes stock tranny is perfect. If you ever get a reduild just get the upgraded servos and do not f- with anything else. No shift kit, use gm clutch set/band. you can always bump the line pressure a little with a programmer.

**ATCharming** · 06-15-2007, 10:21 PM

hey man, im interested in the gears. do u still have them?
if i cant find a set of cheap 373s i might end up buyin those from u.

how much do mechanics usually charge to install gears since i dont have enough knowledge to do it myself.

also, due to my lack of knowledge, will all gm rear gears work in all gm cars?
<<<<<my cars over there.

**97formulaws6** · 06-19-2007, 08:27 AM

what year car do you have ,what ratio do you have now, what did it have new? are you still using the factory carrier? thanks.

If needed I have a stock firehawk posi unit I can sell also for $200.00 thats correct for those gears but I would rather not.

**ATCharming** · 06-19-2007, 08:33 AM

Originally Posted by 97formulaws6

what year car do you have ,what ratio do you have now, what did it have new? are you still using the factory carrier? thanks.

If needed I have a stock firehawk posi unit I can sell also for $200.00 thats correct for those gears but I would rather not.

i have stock 2.72's. i dont believe anything is new, so im pretty sure i have a 2 series carrier. am i right about this?

id also rather not buy the posi unit, if i dont have to.

**95GreenZ28** · 06-19-2007, 06:46 PM

I am wanting the stall, I am just waiting on my tranny to sell and I will take it

**97formulaws6** · 06-20-2007, 05:57 AM

ok will give you some time on the stall,

atcharming - you can only go to 3.08 then you will have to buy the ring gear spacer, long bolts to go any further in ratio. Its best (most reliable , less rotating weight) for you to purchase a 3 series carrier. You may want to find a complete takeout rear for your car with those gears in it and setup already if you don't know how to do it. may be about the same cost after you pay someone to set it up.

**ATCharming** · 06-20-2007, 03:27 PM

Originally Posted by 97formulaws6

ok will give you some time on the stall,

atcharming - you can only go to 3.08 then you will have to buy the ring gear spacer, long bolts to go any further in ratio. Its best (most reliable , less rotating weight) for you to purchase a 3 series carrier. You may want to find a complete takeout rear for your car with those gears in it and setup already if you don't know how to do it. may be about the same cost after you pay someone to set it up.

wow that sucks... but i really appreciate ur info. thanks man.
so my shopping list now includes: 3 series carrier with 3.73's... probly a couple hundred dollars?
correct?