Results 1 to 11 of 11
Thread: Head Gasket Question
-
09-23-2006, 03:28 AM #1
Head Gasket Question
i have a 2002 trans am ws6 with a sts turbo
i am putting 6.0 heads on the ls1 and i am wondering which fel pro head gasket to use? and which valve cover gasket
-
09-23-2006, 06:46 AM #2
- Join Date
- Aug 1999
- Location
- Arizona
- Posts
- 51,364
Black- 383 Procharged & N20 Vert
I would use the GM MLS 6.0 head gasket.
Black 1999 Blown Convertible A4
Forged 383 | ATI D-1SC
NX MAF Kit | 222/226 .585 115
AS Stage II 6.0L FI Heads
Moser 9" | 3.70 | Wavetrac | 35 Spline | Vigilante 3600
548.0 RWHP - 563.8 RWTQ - 10# - D1
666.0 RWHP - 734.2 RWTQ - 125 Shot - P1
Black 2009 Escalade Hybrid 4WD
-
09-23-2006, 08:34 AM #3
-
09-24-2006, 04:23 AM #4
any1 know the model number of that 1 or the fel pro 1?
remember turbo application
-
09-24-2006, 07:32 AM #5
do not use the felpro 1041. the bore size is way too large. even for a 6.0L bore of 4.00". you need to use the head gasket for the LS1 motor as your cylinder diameter hasn't changed (3.898). get the 2003 MLS gasket for a LS1, not a 6.0L.
Felpro 1041 Summit Racing
Bore = 4.135"
Compressed Thickness = .041"
4.135 - 3.898 = .237" open area
what can happen is carbon gets built up in this area and can cause detonation.
now, looking on mrgasket website, they have a MLS gasket thats 4.060" diameter with a compressed thickness of .054". 3143G it says for 98-00 LS1. i know there was something about a notch needed for the older blocks. i'll try to look into it more later.Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
-
09-24-2006, 10:11 AM #6
i see pic u have 11.4 @ 119 i was doin 12.6 @ 114 with 5lbs goin up to 8 lbs on turbo
-
09-24-2006, 07:32 PM #7
just add a nice 50 shot of n2o.
-
10-13-2006, 05:02 PM #8
link me to a site to buy that gasket and price? cant figure which 1 that is, which part number
-
10-13-2006, 05:04 PM #9
which arp bolts would you use also what part number from summitt
-
10-13-2006, 07:44 PM #10
-
10-13-2006, 07:46 PM #11
ARP134-3610
i noticed you are in cocoa beach. i just got home from there. was over at the target in merritt island picking up some halloween decorations for the yard.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
LS1 AFR 210cc V2 Head Gasket Question
By jb3golf in forum Internal EngineReplies: 2Last Post: 11-17-2012, 05:58 PM -
STS blown head gasket?? What head gasket
By 2000sts in forum Forced InductionReplies: 4Last Post: 08-26-2009, 02:23 PM -
Blown head gasket and cracked head in my '00 5.3 Tahoe
By SScatman02 in forum GM TrucksReplies: 4Last Post: 11-13-2007, 08:58 PM -
Head Gasket Question
By Doom in forum LT1Replies: 10Last Post: 07-28-2007, 01:17 AM -
Head gasket question
By grandkodiak in forum LT1Replies: 15Last Post: 06-04-2006, 03:04 PM
Bookmarks