Looking for ET's/MPH for bolt-on & cam cars...please come in!

[5.0stang]

I would like to see what you bolt-on guys with a cam are running. I have just a 1000 ft. track local so if you have times/mph for the 1000ft that would be even better, but 1/8th and 1/4 mile times are good also

Even if you got heads, post up!

Thanks!

[Mr. Luos]

There are cam and bolt-on cars running in the 10's. Granted these are striped cars with a full drag suspension.

Head/cam cars....really depends on how the car is set-up.

I would say lower 12's at about 112-114 would be average.

[slims00ls1z28]

Gimme about 3 weeks to install all this stuff and I'll telly ya .

[juiced99ws6]

freinds 02 formula- bolt ons and 1.8 rockers on my DRs was runnin pretty consistant 12.7-12.9 last night with 2.0 60 ft times. He also had about 8.3s in the 1/8

my 99 trans am- bolt ons only (no spray) was running 12.9s on a good day here at this track and about 12.5s back in FL. I had 8.1 in the 1/8

I had to add 1/8 mile times since I reread your post. You can definatly see by this post where the rockers give you power though.

[BLKCLOUD]

Look here. Use the "select list" pull-down menu over on the right side of the page (its small) to sort.

[5.0stang]

Thanks guys, post the mph as well, that really show the power/weight involved

Off topic: This forum has some 'funny' & entertaining smilies...lol.

[98cammedz]

i have just a cam .595/.598 lift .232/.234 duration.. with pacesetter lts and ory.. im running 12.3@114 on a mickey thompson et. street radial

[Kamarobuddy]

I am hearing bolt on's and cams in the 10 seconds? What are your supporting mods?

[JwMonE99]

Dead thread?

[maxwax]

11.50 a-4 long tubes ,ls-6 intake, ported 241 heads ,vindicator cam ,yank 3600, 3.42, drag radials.

10.68 on a 125 shot.

[Mr. Luos]

I am hearing bolt on's and cams in the 10 seconds? What are your supporting mods?

Everything.

Full drag suspension, big stalled automatic, weight removed, 4.11-4.56 gears, ported FAST intake, slicks, skinnies, etc...