Results 1 to 12 of 12
Thread: Wieght???
-
07-05-2007, 09:23 AM #1
Wieght???
05 M6 Black on red 18" 1 of 124
Where is all the weight hidden in this thing?
There are bigger cars that weigh more....
K&N CAI
Stainless Works LT no cats
JBA cat back
JBA Wires
160 t-stat
SLP predetor Tune
3 1/2" one piece driveshaft
HP???
-
07-05-2007, 02:33 PM #2
- Join Date
- Sep 2006
- Location
- Newcastle,De.
- Age
- 67
- Posts
- 1,047
04 GTO QuickSilver- 95 MarkVIII wifey white
Comfy seats-Junk in the trunk-Skid plate-tow brace if it's on for starters.
04/A4 Quicksilver
Magnflow catback-Resonator delete
K&N drop in
SAP front Grills and 05 hood
Limo tinted windows-Gets me pulled over alot
Diablosport Predator (RWTD) tune.
-
07-07-2007, 10:20 AM #3
did ne one have sucess getting alot of weight out ? with out taking out the seats? like could it be some of the plastic in the back bump and the fron bumper? or does that matter? idk wts the point to that shit maybe for mud doesnt get in between the fenders and shit but did ne one get alot of wieght out of the gtos? and the skid plate did ne one take that off and regret it? maybe becuz of the oil pan busting open? idk just wonder lookin to take wieght out so at least when i race a vette or something it doesnt have me from that shit
-
07-07-2007, 10:44 AM #4
- Join Date
- Jun 2007
- Location
- loyall ky
- Posts
- 347
black, and black- 04 M6
skid plate
slpand bmr sells light weight skid plates, u can get a fiberglass or carbon fiber hood and shave 20 lbs with just a hood
-
07-07-2007, 06:46 PM #5
JUST TO LET YOU KNOW EVEN IF YOU ALREADY DID I THINK OTHERS ARE STILL CONFUSED ABOUT WEIGHT VERSUS ET......... A 100 LBS OF WEIGHT REDUCTION ONLY GAINS YOU A .10 OF A SECOND.
So all these wanna be Fast and Furious boys that take there plastic door panels and there 12 lbs backseat out I don't think the minimal gain is worth the striped look.
Anyways thats my 2 cents.
Put a power adder and don't delete anything other than the spare tire and jack.
I'm going LOW 11's right now with no weight losses and bolt-ons.Don't be afraid of the bottle!!! Be afraid of your tune!!!
-
07-08-2007, 08:08 AM #6
- Join Date
- Jun 2007
- Location
- irving
- Posts
- 18
-
07-08-2007, 01:08 PM #7
- Join Date
- Jun 2007
- Location
- loyall ky
- Posts
- 347
black, and black- 04 M6
bolt ons
what kind of bolt ons u have to do 11's
-
07-08-2007, 01:30 PM #8
The bottle,mufflers,drag radials,and a good tune.
-
07-08-2007, 04:24 PM #9
damn but the bottle isnt hard on the pistons or ne thing like that wt shout do u have a 100 and wt kit is good?
-
07-08-2007, 07:23 PM #10
I'm trying to understand you.... But a 100 shot is a BABY shot!!
I run a 100 shot on 4 cylinders for years!
Yes it is added stress but I've been blowing WAY more than that on my Goat and MANY customers for over a year with NO issues.
The key is a good tune on the A/F Ratio and a proper install on the wiring and plumbing and there is NOTHING to worry about.
-
07-08-2007, 07:31 PM #11
i just tlked to ppl and they told me that u need to watch wt ur doing but wt setup are u running as in kit what shot do u have?
-
07-08-2007, 10:30 PM #12
I'm running a NitrousDirect LS2 2 stage plate with some NX solenoids.
I also have a NX Maximizer controller that I'm not using yet cause I'm only using one stage still. I won't add the 2 stage until I break into the 10's first.
The "shot" that I'm blowing right now is more than a 100 I'll tell you that.
I would recommend a NX MAF kit.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Losing wieght the right way to get back Active:)
By JoshuaGrooms83 in forum Military MembersReplies: 25Last Post: 12-04-2011, 10:35 AM -
10-30 or just 30 wieght oil
By TryMe in forum General HelpReplies: 4Last Post: 07-25-2009, 01:11 PM
Bookmarks