what tranny cooler should i get?

[99w69kitt]

i just bought a tci 3500 stall are all tranny coolers universal and do you need a shift kit when you do cooler and stall? all help will be appriciated

[2001NBMZ28]

B&M 24K is a favorite, been in my car for years with no problems. I don't have a shift kit, just got a converter tune to increase the line pressure some, raised in gear idle, delete torque management... I'd say try a tune first, you can always change the pressure back to stock and then go through the expense of a kit and installation. I initially bought a shift kit, still sitting here unopened.

[hamburger68]

i got a 29 x 19 x 2 cm oil cooler, i think it's a b&m. no extra measures like a shift kit and works perfect.
oh, and i raised the shift firmness / pressure with a hypertech programmer, worked fine for me.

[SINISTER-TA]

I have the B&M 24K as well. I'm running a Yank 3600 converter and have no problems.

[mrr23]

i run a hayden 405 in my cars. near the bottom is how i installed it
http://stealthram.com/transmissionremove.htm

[Y2KPewterSS]

Hayden is what I run as well.

[99w69kitt]

does the hayden kit comes with all you need or is there something else you have to get

[Y2KPewterSS]

does the hayden kit comes with all you need or is there something else you have to get

Comes with all you need. I got mine at Oreilleys, $43 I think.

[99w69kitt]

dam payed 45$ online

[qwkgto]

they make some nice ones with a built in fan those are awesome they just turn themselves on when temps get above 175.

[mrr23]

does the hayden kit comes with all you need or is there something else you have to get

with the route i ran the lines, i had to get another 4 feet of hose.

[hamburger68]

with the route i ran the lines, i had to get another 4 feet of hose.

did you put it on the rear wing???