stall/rear end question

[Blackout99]

My car is in the shop right now gettin a new 4L60E tranny and 3500 stall put in, i have stock 2.73 gears and rear end, and my car puts 360 down at the wheels, does anyone have a 3500 or higher stall with the same or more power and launched it with a stock rear end? i just wanna make sure i can launch it like that n not worry about it breaking, o n its on street tires so im sure ill have traction problems even if i got them hot,

Thanks for ne help

[01WS6475hp]

You wont have to worry about breaking anything because you will just be spinning the street tires all the time. You need some drag radials.

[00z28bubba]

if u plan on keepin that rear end for a while i would NOT get drag redials. but a4s are easier on the rear end.

[SteveC]

I agree about no drag radials, and ditch the 2.73's for 3.73's if your vehicle is NA.

Don't forget to get a transcooler, and shiftkit.

SteveC :)

[98 formula ws6]

I have a 3500 stall, M/t drags 10 bolt with 4.10s about 320 to wheels runs 13.05 at 104

[nhraformula]

I agree about no drag radials, and ditch the 2.73's for 3.73's if your vehicle is NA.

Don't forget to get a transcooler, and shiftkit.

SteveC :)

ive been running DRs on my rear for years and im stalled and cammed.

keep away from the MT DRs and youll be fine, all others slip.

[Blackout99]

i plan on getting some 3.73's sometime, anyone kno how much they would cost to get installed? and the new tranny came with a new trans cooler, and what does the shift kit do? does that change ur shift points or something?