LonghornTA
12-23-2005, 09:08 PM
I put a RAM PowerGrip(not HD) in about 4000 miles ago and the disk sheared about half an inch away from the friction material.
So know I am looking looking either purchasing a CenterForce I disk for about $100 or getting a whole the PP Disk Dual Friction setup for around 370 or so.
I'm putting about 380/390 to the ground so I was thinking the Dual Friction was overkill since I don't plan on modding the car anymore until after Law School (ie 3 or 4 years).
CenterForce says 30% more holding power or whatever than stock which is right around what I have. I don't go to the track ever (sometimes I dabble in street racing:wall: ) so does the CF I sound like a good choice or maybe something a little tougher?
So know I am looking looking either purchasing a CenterForce I disk for about $100 or getting a whole the PP Disk Dual Friction setup for around 370 or so.
I'm putting about 380/390 to the ground so I was thinking the Dual Friction was overkill since I don't plan on modding the car anymore until after Law School (ie 3 or 4 years).
CenterForce says 30% more holding power or whatever than stock which is right around what I have. I don't go to the track ever (sometimes I dabble in street racing:wall: ) so does the CF I sound like a good choice or maybe something a little tougher?