A4 Gear Recomendation

[jz28]

I need help choosing a set of gears. What would you guys recommend as far as brand and ratio.. Thx in advance.

[Spikito]

from what ive been told as far as being a good balance between street-ability and performance is the 3.42's. They are one of the factory options, i have them, 3.73 is another good one. 2.73's ive heard are too high for the A4, but good in an M6. $.10's are just too low for the street

[stephen02ws6]

go with 3.73s. as far as brand I dont know. i have Richmand and they are a little noisy. i have been told that they tend to be more noisy than other brands.

[Ryans99LS1]

3.73s are perfect.

[shady milkman]

3.73..period...brand really doesnt matter much...if properly installed ..they will not whine anymore then stock...but alot of people improperly install gears...even seasoned mechs.

[NVEEOUS]

3.73

[stephen02ws6]

breaking the gears in properly will help with the noise too.

[shady milkman]

breaking the gears in properly will help with the noise too.

:yup:

[N20LT4]

Moser 3.73's.

[GULLETT17]

3.73 :yup:

[Ed Blown Vert]

Have you done a stall already??

[jz28]

no stall yet. but i'll definitly go 3.73's

[Ed Blown Vert]

Go stall before gears.

[N20LT4]

If leaving the line hard is what your after, I'd say stall first. Of course w/ all my A4 cars, I go tires first, stall second, then gears - that's if i'm not doing all three at the same time ;)

[GatorSS]

3.73 for A4. I have Strange 3.73s with an M6, which works well for my purposes since it's never seen a drag strip, but occasionally frequents a track now and then.

[toofpaste]

3.73 on mine

[slims00ls1z28]

4.10's = mo fun.

[N20LT4]

4.10's = mo fun.

4.10's are terrible in an A4 street car.

[ATCharming]

i have 3.90s in my dd ss. lots of fun.