TIP, for easy coil pack removal/install passenger side!

[ibanez7]

To save your knuckles on future engine work:
when you remove the passenger side coil pack, you will discover that the rear stud is a bitch to get to and remove. So once the stud and coil pack is removed, trim the rear mounting hole on the coil pack into a "U" shape.

This way you can fasten the stud back into the valve cover and slide the coil pack mounting hole into the stud. Now for furture removal you will only have back the stud off alittle bit or tighten it a little bit.

This is the where I cut my hands up and it really slowed down the process trying to lossen that stud!!!

[SeVeReDiStOrTiOn]

Or just don't put the last bolt back in:).....that's a good tip though:yup:

[ibanez7]

Or just don't put the last bolt back in:).....that's a good tip though:yup:


LOL, you could do that too cause that bastard is a pain to get too!!

and thank you!!!

[nytmare]

Ok... I'll ask in this post too. Pics please???

[ibanez7]

Ok... I'll ask in this post too. Pics please???

I didnt take pics, but I will find some online or take new ones and point out what I mean!

it is helpfull if you need to remove and passenger coil pack often!

[nytmare]

I didnt take pics, but I will find some online or take new ones and point out what I mean!

it is helpfull if you need to remove and passenger coil pack often!

Thanks! Bet this would come in handy for plug changes too.

[Mr. Luos]

As mentioned...I just leave that bolt out.