My WS-6

[RLamas]

I have a 99' WS-6,I had it dyno tested does it sound o.k thats it is only pushing 315 hp out the rear wheels with an slp intake and full exhaust?

[Mr. Luos]

Only??

Mine was about that as well. That is accurate....

[Y2KPewterSS]

315 sounds about right for a 99 WS6 with exhaust and I assume you mean an SLP lid. Are you auto or manual tranny?

[RandomOmen]

Looks like I'm dead wrong :) I'll delete my post about it being low.

[third_shift|studios]

my last 2000 had the same mods and same numbers.

[Tyler_LS1]

when you say full exhaust you mean header aswell?

I put down 328rwhp with my mods and stock tune

[Numba1TA]

sounds like it is accurate I have a 99 WS6 and had it dynoed completely stock and it put down 271rwhp which equals about 320 at the crank.
271/.85=318 or 271x15%

[RLamas]

I,m sorry I did mean SLP Lid and it also has headers,what kind of mods can I do with 1000 dollors to get the most hp out of my ws.6 with manual tranny?

[Speed Psychosis]

sounds like it is accurate I have a 99 WS6 and had it dynoed completely stock and it put down 271rwhp which equals about 320 at the crank.
271/.85=318 or 271x15%

271 is much lower than what many people claim stock. should be closer to 300.

[2002 WS6 KILLS]

Seems a bit low to me if you have Longtubes.

[qwk93ta]

I,m sorry I did mean SLP Lid and it also has headers,what kind of mods can I do with 1000 dollors to get the most hp out of my ws.6 with manual tranny?


I would get a LS6 intake and a cam.....that might be a little over $1,000.

[blackbirdbrain89]

ok i have free mods,slp lid slp bellow magnaflow cat back and a alum flywheel. with a centerforce clutch and i put down 341 hp and 352 tq on a dunojet btw its a 2000 non ws6 with 55k on it at the time

[basballny2]

seems kinda low to me, whats your a/f ratio? get a tune

[WalterS6]

Mine is 98 WS6 SLP headers ORY M6 before tune approx 305 at the wheels
after New Era tune dynoed 320