PDA

View Full Version : valve cover breather ....

stangslayer98
05-07-2008, 10:08 AM
was wondering if anyone has a k&n part number or some info about a speed shop that sells a valve cover breather for a 98 t/a ive gone to a local speed shop and an autozone and couldnt find a damn thing :bomb:
Mr. Luos
05-07-2008, 10:14 AM
Is this a race car??

If not...I would recommend a catch can over breathers.
sunsetorangess
05-07-2008, 10:29 AM
Is this a race car??

If not...I would recommend a catch can over breathers.

Yepp
stangslayer98
05-07-2008, 10:47 AM
its not a race car....catch can like the one's on the old school 350's had... know of any companies that make them for the ls engines
Mr. Luos
05-07-2008, 11:24 AM
its not a race car....catch can like the one's on the old school 350's had... know of any companies that make them for the ls engines
Thunder Racing has one.
Firebirdjones
05-07-2008, 11:43 AM
Alot of people do both a breather on the valve cover and a catch can on the PCV system.
Firebirdjones
05-07-2008, 11:52 AM
Check out www.pfyc.com for an LS1 breather. It's made to screw right into the stock valve cover and replace the stock rubber cap. Helps with crank case venting, something the LS motors struggle with.

If you want an oil catch can too those can be found most anywhere, some sponsors here carry them. They work well for the PCV system to catch any oil that may be present before it enters the intake track,,,what seems to be another common LSx problem for some people.
Hope that helps.
stangslayer98
05-07-2008, 12:09 PM
cool ill check those sites out..... going through some old magazines i found that speed inc has a helix mounted one too for $44 bucks looks nice and clean thanks for the help
GULLETT17
05-07-2008, 01:31 PM
Check out www.pfyc.com (http://www.pfyc.com) for an LS1 breather. It's made to screw right into the stock valve cover and replace the stock rubber cap. Helps with crank case venting, something the LS motors struggle with.

ooo. . thats pretty damn cool :yup:

ws6 store has a nice billet catch can for $90 :D
Firebirdjones
05-07-2008, 06:28 PM
ooo. . thats pretty damn cool :yup:

ws6 store has a nice billet catch can for $90 :D

I found that place through Sarge I think....I picked one up and like the quality and the idea of it scewing right in the OE cover without any issues.

I'll check out the WS6 store for the oil catch. I have been contemplating the oil catch can. I haven't seen much oil at all in mine since I switched to the updated PCV valve a while back. But I still think the catch can may be in the future. Thanks.