PDA

View Full Version : what ignition wires do you guys run?

blu02ss
08-14-2005, 12:09 PM
Hey everyone. Will be replacing my plugs and wires soon and just wanted to
see what wires you guys have.
LS1Power06
08-14-2005, 07:21 PM
MSD, i used them on my LT1 and they worked excellent so i went back to MSD
ullose2
08-14-2005, 08:44 PM
I put the Taylor "thundervolt" wires on mine. Look great too.
keliente
08-15-2005, 03:23 PM
Stock. No need to replace unless they are damaged.
blue02formula
08-15-2005, 05:33 PM
Taylor 409 race wires. Noticed a smoother idle over stock. Look nice in blue.
http://img.photobucket.com/albums/v629/blue02formula/6ddf274b.jpg
keno2095
08-15-2005, 06:32 PM
Taylor Thundervolt 10.4mm
Ric
08-15-2005, 08:22 PM
OEM. When those go out, I'm gonna make some out of 4-gauge battery cable. :yup: :beer3:
greasy-chicken
08-15-2005, 08:42 PM
MSD 8.5 mm, Red no problems yet.
2001NBMZ28
08-15-2005, 08:54 PM
When I did mine I went w/taylor thundervolts - didn't want to deal with the stock wire metal covers/springy things again, they're spares now.
Figz z28
08-15-2005, 08:58 PM
Stock wires are the best wires to go with! :)
ninobrn99
08-16-2005, 03:43 AM
a friend gave me a set of msd 8.5mm's so i put those in. Had the stockers in there before replacing...just did it sunday.
blue02formula
08-17-2005, 10:24 AM
Stock wires are the best wires to go with! :)

I work where they make the OEM ignition leads, and I can get them for free, I don't use them on my Formula. What dose that tell you?
blue02formula
08-17-2005, 10:27 AM
OEM. When those go out, I'm gonna make some out of 4-gauge battery cable. :yup: :beer3:


I would not do that, but if you do will you video tape the first time you start it for me? :lol:
tjswanson2001
08-18-2005, 01:10 PM
When I put my headers on, I replaced the stock wires with the Taylor Thundervolts. Great wires and with the 10.4 mm thickness, they can handle heat, no problems here.