ford 9in

[fastlt196]

Did anyone swap in a ford 9in and need to get a longer driveshaft. My shaft is sticking out about 3 in. and makes a slapping sound the second the car starts moving. The rear is from quick performance

[Jays00ss]

I used my stocker and was fine. I then bought a Strange 3" chromoly one and it was a little less than 1/2" longer than stock and still ok.

I also bought my 9" from quick performance.

Do you have adjustable suspension parts? if so you might need to do some adjusting?

Did you get a Detroit locker? If so they make a lot of noise and that's what you might be hearing?
I know mine makes some racket.

[fastlt196]

i dont have any suspension parts except a aftermarket torq. arm and its not adjustable. I had them put a mini spool in the center section with 3.50 gears. Did ur rear get quiter as u broke it in?

[Jays00ss]

i dont have any suspension parts except a aftermarket torq. arm and its not adjustable. I had them put a mini spool in the center section with 3.50 gears. Did ur rear get quiter as u broke it in?

mini- Spool should be nice and quiet. What kind of drive shaft do you have? What conversion u-joint did you use? Maybe you can post pics of your engagement into your transmission. other than that? I don't know. I have not herd of the driveshaft ever being too short.

[mghawk57]

I was told the driveshaft for the 9" F-body fit is 1 inch longer.

[fastlt196]

a just had another guy tell me the driveshaft is a inch shorter than it should be so it looks like i will be measuring for another driveshaft. Thanks

[Jays00ss]

a just had another guy tell me the driveshaft is a inch shorter than it should be so it looks like i will be measuring for another driveshaft. Thanks

let me know, I know where you can get a Strange 3" chromoly one with 1350 yokes , strange sealed u-joints rated to 1000 hp for $295 shipped

[mghawk57]

Sorry I ment shorter - My bad !

[Zboner]

hum, mine fit PERFECT!!!!!!!

[fastlt196]

i put a longer yoke on the front and it works perfect. How much noise should u hear from the rear because it definetly is not silent? love the 3:50 gears

[Jays00ss]

i put a longer yoke on the front and it works perfect. How much noise should u hear from the rear because it definetly is not silent? love the 3:50 gears

With any after market High performance rear end with hardened gears, you will get some noise out of them. (the price you pay if you want to play) But if it is overly overpowering something could be wrong. When I said nice and quiet, I meant not as bad as mine LOL.

I have a Detroit Locker and it bangs, clunks, makes loud metalic noises, But I knew that when I bought it and it makes a good conversation piece. :cool2:

[slims00ls1z28]

Mine was a bolt in nothing needed driveshaft wise.