View Full Version : roller rockers
lilicedout24
12-04-2005, 10:58 AM
ok what is the benifit of roller rockers over stock. is it worth it? for the prices 98 Ta ls1 A4
nhraformula
12-04-2005, 11:20 AM
not worth it if you ask me.
lilicedout24
12-04-2005, 11:27 AM
thankx man what mods u made to get a 12 sec car
nhraformula
12-05-2005, 07:08 PM
thankx man what mods u made to get a 12 sec car
volant cai, 224/224 cam, ls6 intake, long tube headers, tci 3000 stall, tuning and nittos.
lilicedout24
12-08-2005, 08:22 PM
volant cai, 224/224 cam, ls6 intake, long tube headers, tci 3000 stall, tuning and nittos.
damn i have a lot of shit i hope i can hit the 12's whats a good size nittos i have 16 inch rims on car or would it be better to get a pair of street slicks et or ?
nhraformula
12-08-2005, 09:03 PM
damn i have a lot of shit i hope i can hit the 12's whats a good size nittos i have 16 inch rims on car or would it be better to get a pair of street slicks et or ?
with a stock rear and too much power, i would worry about any tire that is too sticky.
i have 16 inch rims also.
the nittos are a good tire, but dont hook the best once you get past 350 rwhp.
they still do hook rather well, just not like a slick.
with a set of slicks, i would see 11s.
Redphoenix1998
12-09-2005, 02:43 AM
I'm in the 11's with BFG DR's but I do have major traction problems. I've heard good things about the MT DR's so I'm looking into those next
lilicedout24
12-09-2005, 10:01 PM
thankx for the info i will start with the nittos and then if i have hooking problems advance to slick the mt what the hell ill just buy the slicks
MadSeason
12-15-2005, 10:17 AM
ok what is the benifit of roller rockers over stock. is it worth it? for the prices 98 Ta ls1 A4
They will increase the HP/TQ across the RPM Range about 10-22 HP depending on your application. They will also made your engine rev faster, so despite the small gain you will get the power faster. You can also tow around with higher ratios and get more lift, but it's generally frowned upon because you can get more lift ground into a cam and you're only moving the power up the rpm band
vBulletin® v3.8.0 Beta 4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.