corvette servo

[fatalvision]

someone told me that some ls1 camaros and TA's come from the factory with corvette servos already installed. Is this true and if so how can i tell? are there any codes on the inner door sticker or in the vin that could tell me. i have just the standard trans am

[xtremetrans]

All LS1 F-bodys with 4l60-e come with the vette servo.

[fatalvision]

i should probably move up to the superior if im not satisfied with my shift firmness. if i dont wont to go the shift kit route, what are my options

[performabuilt]

i should probably move up to the superior if im not satisfied with my shift firmness. if i dont wont to go the shift kit route, what are my options


I would not go to the superior , Though we do use them in our builds we also use and aftermarket band with heavy duty lug and pin area. With the stock band I have seen these cause the band to tear through the pin area. One upgrade you might consider just to stick in there would be the sonnax super hold second servo , Its patterned after the corvette and I think gives about 11 percent more apply area.


http://www.ls1.com/forums/image.php?u=28339&type=sigpic&dateline=1197006284 (http://performabuilt.com/)FREE COOLER/SHIPING, NO CORE OR CHARGE,1YR WAR, CUST TRACK VIDEOS (http://performabuiltautomatics.com/pbmedia.html) click banner 4 website, CALL 9 AM TO 12 MIDNITE 7 DAYS OR YAHOO MESSENGER (http://edit.yahoo.com/config/send_webmesg?.target=performabuilt&.src=pg)

[fatalvision]

install outside the transmission what exactly is a second servo. im a little dumb when it comes to transmissions

[xtremetrans]

The vette servo is second servo, same part as the sonnax, but the sonnax has more clamping force which would be a good choice, you would install the same as the vette servo (from outside). If I were you I would look into gettin a shift kit installed.

[performabuilt]

The vette servo is second servo, same part as the sonnax, but the sonnax has more clamping force which would be a good choice, you would install the same as the vette servo (from outside). If I were you I would look into gettin a shift kit installed.


Probabaly the best over all idea :)