PDA

View Full Version : some crane shaft mount rocker spy photos

mrr23
08-12-2005, 03:43 PM
while i was vinci today, i had the opportunity to sneak some pics of the developmental vinci/crane shaft mount rockers. from what i can tell, these rocekrs mount 2 per stand and are held down by three bolts. the stand is bolted to the head. then the shaft rockers are bolted to the stand. some major modification to the heads will be needed. these rockers, once available, will come in ranges from 1.7:1 to 2.0:1 ratios. these are for real high end racers. they are also fabricating a 1" valve cover spacer as well. vinci has fitted them to a set of AFR 205 heads to go on their PROJECT C6 car. so, here's the pics and enjoy!!!

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/NO%201%20RKR%20CLEARANCE%20TO%20HEAD%20REAR.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/RKR%20TO%20SPACER%20CLEARANCE%20TOP.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/TOP%20RKR%20CLEARANCE%20AGAINST%20SPACER.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/VALV%20COV%20SPACER%20CLEARANCE.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/VALV%20COV%20SPACER%20TAB%20FRONT.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/VALV%20COV%20SPACER%20TAB%20REAR.jpg

http://stealthram.com/SHAFT%20MOUNT%20PROJECT/VALV%20COV%20SPACER%20TABS.jpg
Killer_bluebird
08-12-2005, 09:39 PM
Nice! BTW that is some big ass valve cover spacer!!!:eek:
mrr23
08-12-2005, 09:40 PM
1" tall.
Demon_Speeding
08-29-2005, 11:14 PM
Looks tits!!! Wonder how much they'll cost.
notbob
09-27-2005, 12:48 PM
I saw these for sale on ws6project... anyone used them yet? whats the advantage?
Rhino21149
09-27-2005, 02:17 PM
What do they cost? They look alot like the Jesel Pro series but I hope they cost a lot less.

I've bought three sets for various engines : a Hornet set from Ligenfelter for about $800, and two different Jesel series (one adjustable, one not) for about $1300 and $1600.
mrr23
11-24-2005, 09:46 PM
still experimental at this point. sometime next year for ls motors public release.
GatorSS
11-24-2005, 11:50 PM
:drool: :love:
wesTXwitesnake05
03-14-2006, 07:24 PM
those rockers are a work of art! i bet they will be expinsive as hell though...:shots:
mrr23
03-14-2006, 07:25 PM
from what i've read, they are going to be under $1000.00 . you'll still need to buy the valve cover spacers.
jrp
03-17-2006, 09:48 PM
from what i've read, they are going to be under $1000.00 . you'll still need to buy the valve cover spacers.

i believe tony mamo told me they were gonna be a bit more. at any rate, i saw his and there fucking pimp, and worth were worth 10hp over his old HS (i believe) rockers.
mrr23
03-18-2006, 11:57 AM
he had the vinci/crane 1.7 accelerated lift rockers before.

here's a graph of vinci C6 project car with the 1.8 accelerated lift rockers.

http://www.vincihighperformance.com/vinci/graphs/C6%20AUTO%20HEAD%20AND%20CAM%20INSTALL%201.8.jpg

here's the graph with the 1.7 shaft mount rockers

http://www.vincihighperformance.com/vinci/graphs/C6%20AUTO%20HEAD%20AND%20CAM%20INSTALL%201.7%20SHA FT%20ROCKERS.jpg