02 ls1 vs 92 fox

[02.LS1]

raced a 92 fox body today:_) bottle to bottle. from out of the dig he pulled me through first and second, got him in the middle of third and had him by 2 1/2 in fourth:_). with second gear rolling start even til i hit third then pulled 3 two times in a row. he was blowing 150 shot and i was only blowing 100. i will have the video with all three runs up by the end of the night at streetfire.net

[mogs01gt]

Im surprised you didnt pull more. The fox must have had more done to the engine.

[TrickStang37]

ya. it basically takes a 150 shot on a stock 5.0 mustang to run with a stock LS1.

[02.LS1]

Im surprised you didnt pull more. The fox must have had more done to the engine.

the fox body had full bolts, geared, with pi heads, an " f " cam and nitrous:_)

[02.LS1]

ya. it basically takes a 150 shot on a stock 5.0 mustang to run with a stock LS1.

basically thats right but in the case he was built:_) i have pulleys, slp intake and lid, throttle body, exhuast with eletric cut out, gears, nitrous and i have been dyno tuned.

[JwMonE99]

basically thats right but in the case he was built:_) i have pulleys, slp intake and lid, throttle body, exhuast with eletric cut out, gears, nitrous and i have been dyno tuned.

What numbers are you pushing?

[TrickStang37]

the fox body had full bolts, geared, with pi heads, an " f " cam and nitrous:_)

pi heads? thats SOHC

if he had full bolt ons (including decent heads), he should be trapping about 125mph with a 150 shot.

[hutch1999]

sounds like some good racing, damn 5.0s you can never tell how nasty they are till you run one

[180ls1]

pi heads? thats SOHC

if he had full bolt ons (including decent heads), he should be trapping about 125mph with a 150 shot.

ya people use pi heads for a cheap way to gain a good amount of power on the 5.0's

[TrickStang37]

haha your kidding, right?

the pi heads are 99-04 SOHC Modular parts, not 302 windsor parts. Whole different species. Its like saying people bolt on ZR1 heads on their 350 small block.

I know your not supposed to know ford parts, or atleast know about them in depth. Its not a flame in any way. I remember years ago thinking a 305 was a destroked 350 HAHAHA

[nevrlift]

nice kill....those fox's are light lil boogers. I hope to build a 351w stroker for a fox one day in the far distant future....

[SicWs6]

Did you get that video? Put up the link to it, Id like to see it!

[BLKCLOUD]

ya people use pi heads for a cheap way to gain a good amount of power on the 5.0's

There is no such thing as "PI Heads" for a 5.0.

[nitrobusa]

I want to see video also.

[mogs01gt]

the fox body had full bolts, geared, with pi heads, an " f " cam and nitrous:_)
PI heads???? That is a mod engine term. Sounds like the dude was bullshitting you on mods.

[nitrobusa]

I thought PI was for:ughlaugh: plastic intake........... lol

[mogs01gt]

The 5.0 owner probably said P heads, not PI heads.

[nevrlift]

The 5.0 owner probably said P heads, not PI heads.


ahhh...but what about the 302 cammer??? PI or non PI..??

[TrickStang37]

cammer is dohc.

[mogs01gt]

ahhh...but what about the 302 cammer??? PI or non PI..??
The cammer is a very expensive DOHC engine, so not a PI headed engine. Awesome engine but with a steep price tag. For the cost of the thing, might as well got with a Big Block.

[BlankinSShip]

So who's gonna be the one to first tell me what PI stands for, and then tell me I'm an idiot for not knowing a Ford part???

Great to hear you killed a fox body... They one some of the few Stangs I can appreciate...

[02.LS1]

So who's gonna be the one to first tell me what PI stands for, and then tell me I'm an idiot for not knowing a Ford part???

Great to hear you killed a fox body... They one some of the few Stangs I can appreciate...

PI stands for performance improvment. but as i was looking more into it i think that the guy was mistaking cause now that i think of it pi heads are mainly for the modular ford motor.

[TrickStang37]

i thought the 429 with the special PI heads stood for police interceptor since most of the old ford cop cars had em?

[TrickStang37]

The cammer is a very expensive DOHC engine, so not a PI headed engine. Awesome engine but with a steep price tag. For the cost of the thing, might as well got with a Big Block.

compared to the cost of MOST engines (not just the cammer), its cheaper to just build a monster BBF, 557 cubic inches is only a $1500 stroker kit away and heads that flow 400CFM are about $2400. 800+HP right there. Of course there are other expenses but you get the idea

[nevrlift]

The cammer is a very expensive DOHC engine, so not a PI headed engine. Awesome engine but with a steep price tag. For the cost of the thing, might as well got with a Big Block.

ahh i am eduacted....damn MUST be pricey with the 4v's