PDA

View Full Version : Blower motor fusible link

steve01
11-18-2007, 07:36 PM
Does anyone know where the blower motor fusible link and high blower relay are located on a 1998 Z28?
0rion
11-18-2007, 09:44 PM
to be honest with you I don't know where the relay is on my car...probably one of the only parts I've never taken off the car. Have you verified there's no voltage at the motor? What's your symptoms?
steve01
11-20-2007, 09:21 PM
No pwer at the motor. Resistor pack is good. I suspect a broken wire between the HVAC fuse and the control panel
0rion
11-20-2007, 10:52 PM
sorry to hear that. Broken wires are definitely a pain in the butt to track down.
jigger1166
11-21-2007, 05:13 PM
You know the resistor is good for sure?
Is there power going to it?
There should be a wire for- Batt. power(red), one for ground(black),and a wire for each position of the switch. There should be power to one of the wires at each position of the switch.
If you have Batt. power, and a signal from the switch, there should be power going to the blower motor. If not the resistor is bad.