Xmas Thoughts

[JoshieDoom]

I was wondering.... what would you get first with your Christmas Bonus...

1. SLP Lid..2.Drilled and Slotted Rotors..3.Chrome Goodies. 4. Headers etc...

what would you do>?

[blackbirdbrain89]

lid is the cheapest way to add power.. its what 100 bucks.. why wait till xmas and if u get rotors do not get cheep ones.. they will warp ther fore no added stoping power.. been ther done that.. get power slot or some thing like that and get better pads at the same time and if u want harder faster peddle get lines as well. and headers are a bitch to put on..

[third_shift|studios]

don't get drilled/slotted, they are for show. Just get some decent priced slotted ones. That's what I would do.

[D3VIL]

good thread, i was gonna start one like this but you beat me to it. I need money christmas to pay some bills and also good for gas money!

[matthew7hayes]

don't get drilled/slotted, they are for show. Just get some decent priced slotted ones. That's what I would do.

don't get slotted, just get slotted ones ? :confused:

[JoshieDoom]

Awesome advice on the rotors. I about made that mistake. My brakes are getting kinda weak.... Pads are good but rotors are EL WARPO!. Shaking Pulsating crap. So.. My plan after bills, presents etc, LID, then drilled and slotted rotors.. LT.. next maybe. Any more power ideas for Xmas.

[sirenformula350]

don't get slotted, just get slotted ones ? :confused:

he was saying not to get the drilled/slotted because the cross drilled ones are just for show. Also, there have been instances that I've seen with the cross drilled rotors where they'll develop stress cracks by the holes. I'm sure someone will have pictures of this for you. Slotted FTW.

[sirenformula350]

back on topic.... I don't get a Christmas bonus because I have a Sh*t job but the parents still like to buy me things so I think I am going to finally get my SFC's and a driveshaft loop.

[Ryans99LS1]

Prokit lowering springs, SFC's, Cams rods and valves springs, and some 17" smoothies.

Ohhh if only i had the money haha. Its always good to dream.. Ive spent way too much on my car in the past 2 months i have to chill out for a few months.

[1fastcamarosss11]

don't get drilled/slotted, they are for show. Just get some decent priced slotted ones. That's what I would do.

don't get slotted, just get slotted ones ? :confused:

:toetap:

i have the wilwood brake set up 6 piston in front and 4 piston in the rears. they work. meaning cross drilled and slotted.:playball::right::hahano::hide::flex::ughl augh:

[ApexVIII]

heads and cam FTW!!! well thats a little more then my bonus lol

[Hot Black Trans-Am]

Headers & exhaust with the lid. For brakes I'd just do Brembo blanks with hawk pads.

[blackbirdbrain89]

cheep d/s breaks are BAD they often get stress cracks from the holes.. good d/s are alsome, good ones have holes are drilled pre cast.. wich means that they are stronger then post cast holes. thats why u do not get cheap d/s.. if u dont think its true look it up thats why power slot will never make d/s . i thint it is or was on ther website at one time.. and a matter of fact its in a few of my ASE study books :uzi: