E Cutout Switch Mounting

[kebie05]

How hard is it to hook up the switch for the electric cutout? also does anyone have any pics of some good mounting spots for the switch? thanks

[kebie05]

anyone? anyone at all??????????????????

[440 rwhp trans am]

i dont have a pic but i put mine in the cigertte spot since i dont smoke. well here is one you can kind of see it.http://http://i50.photobucket.com/albums/f302/mattcoker/Picture111.jpg

[440 rwhp trans am]

http://http://s50.photobucket.com/albums/f302/mattcoker/?action=view&current=Picture111.jpg

[kebie05]

it was an invalid link.

[cobrahunter]

Mine is in the space for the convertable top switch.

[kebie05]

i am not really sure where that is.

[cobrahunter]

It's the rectangular opening just in front of the stick shift.

http://memimage.cardomain.net/member_images/8/web/392000-392999/392726_10.jpg

[0rion]

I can post pics of mine tonight when I get home. I made a plate out of plexiglass to cover that cubby hole in front of the shifter and mounted the switches in it. Not the greatest looking install but fairly clean looking. I painted the back side of the plexiglass so that you can't see through it.

[Ed Blown Vert]

The switch in the middle.

http://members.cox.net/blownz28/cutout/switch.jpg

[kebie05]

that is a lean looking plate there. how is it held up there? what did you make it out of? thanks

[Ed Blown Vert]

that is a lean looking plate there. how is it held up there? what did you make it out of? thanks

That plate is the convertible one which hold the switch that controls the top.

[kebie05]

ohhhhhh. ok.

[ProwlerZ]

I've got nitrous switches on the ever-so-popular cubby hole panel, so I cut a sheet of carbon fiber and made a small box that holds them and sits in the center console. It's held up by the two bolts that are under the change holder, and the change holder still sits there on top of it. I'll have to get some pics... Though I'm thinking of just making a solid plate to cover the whole underside of the center console to relocate all of my switches and get them out of view, then I could throw some papers over them and they'd be nice and hidden!

[Ed Blown Vert]

I put my nitrous switches in the stock location. Do you see them?

http://members.cox.net/blownz28/n20/switches.jpg

[1fastcamarosss11]

I put my nitrous switches in the stock location. Do you see them?

http://members.cox.net/blownz28/n20/switches.jpg

mine are in the same spot.

[Y2KPewterSS]

The switch in the middle.

http://members.cox.net/blownz28/cutout/switch.jpg

I recognize the top up/down switch and the e-cutout switch, but what is the switch on the far right for?

Very clean setup with the fog light switches as well :cool2:

[Ed Blown Vert]

I recognize the top up/down switch and the e-cutout switch, but what is the switch on the far right for?

Very clean setup with the fog light switches as well :cool2:

Thats my bottle opener.

[Daniel P.]

I put my nitrous switches in the stock location. Do you see them?

http://members.cox.net/blownz28/n20/switches.jpg

why do you have 3 fog light switchs?

[Twistingreality]

The foglight switches are for his nitrous....Good Setup.....

[greatwhiteZ28]

where and how much are those stock switches?

[kebie05]

where and how much are those stock switches?

i would like to know also.

[SLP02SS]

mines in the ashtray, i used red plexi glass and at night it lights up red

in the day

http://a338.ac-images.myspacecdn.com/images01/21/l_168967190aeb011dc6cfbc4e323e54a9.jpg

at night, then if you close the door you cant see it at all

http://a513.ac-images.myspacecdn.com/images01/32/l_297c366911e9f1f49073c25032927098.jpg

[kebie05]

that looks cool......