Question for guys with 17x11 up front

[ls1geezer]

Hi guys I plan to put 17"x11" on all four corners of my '98 Camaro. It's lowered about 1.5" in front and about 2" out back. I see a couple of you with this setup using the ZR1s with the 50mm offset and small 7/32" or 1/4" spacers up front. However I'm thinking of going with the Torq-Thrust II with 45mm offset. If my math is correct that should give me an extra 1/5" more clearence. Do you think I will be able to get away without using spacers?
Thanks in advance
Josh

[PaganEgyptian]

Thats a hard one Bro, I know Corvette C-5 17X11's will work good on all fours on a vette with almost no rub, I would take a chance on them with an F-Body IF you have very stiff suspension. On my stock suspension, 285/40 is the widest I can run while keeping the fender liners in place, So I prolly could IF I removed the fender liners. Thats my guess - Tim

[Eugenio_SS]

there is a guy using those without spacers.
his user is -=Modified=- in ls2.