HotRodV6
11-06-2005, 12:29 PM
Ok, well im building a 6.0L for my Sonoma GT and while i want to builkd a stroker, the money for the crank and just not there right now, so i am going to use the stock 6.0L crank, and i wanted to know if you can run a 6.125 rod on the stock crank and what pistons would be needed to get atleast 10.75 -11.0 CR and i have a set of stage one ported LS6 heads with 2.02 1.60 valves that flow right around 280 on the intake side and 180 or so on the exhaust side.
Is there a shelf piston that i can use or would i have to go custom. I know once i get the stroker crank ill need new pistons, so i dont really want to drop alot on pistons right now, even a Hyperutectic set would suffice.
Thanks for the help.
Is there a shelf piston that i can use or would i have to go custom. I know once i get the stroker crank ill need new pistons, so i dont really want to drop alot on pistons right now, even a Hyperutectic set would suffice.
Thanks for the help.