PDA

View Full Version : Is this cam capable of these numbers!!!

NeeD4SpeeD
11-04-2005, 11:38 PM
Is this small cam capable of producing all this power?

Comp Cams LS1 Camshaft - 216 / 220 .525 / .532 114 LSA 1300-6300 RPM Power Band

http://i6.photobucket.com/albums/y242/NeeD4SpeeD69/216220headsintake.jpg

:screwy: Call me crazy but i think these numbers are little high for a cam thats really not wild...Why does this cam produce so much power?

Is it the bolt ons?
Hurley711
11-05-2005, 05:20 AM
1st line of "Other supporting mods" Stage 1 heads
nhraformula
11-05-2005, 08:24 AM
maybe with a good set of heads and all the bolt ons.
Hurley711
11-05-2005, 08:46 AM
I know it doesn't add much, but I'm sure the pulley prol added a few ponies to that dynop sheet too. Aren't they usually good for 8-12 on the dyno?:think:
ninobrn99
11-05-2005, 08:56 AM
with an agressive tune and with the supporting mods, id say yes, its possible. some cars are just freaks. :shrug:
NeeD4SpeeD
11-05-2005, 03:58 PM
I figured it was because of the supporting mods.... Yea and i've heard of the freaks....gotta love thoes few weird ones:Owned:
Eric @ DMS
11-05-2005, 04:27 PM
Also depends on what kind of dyno was used. SOme are more accurate than others.
NeeD4SpeeD
11-06-2005, 09:53 AM
That is very true.. never took that into consideration... EH oh well i'm not buying that cam anyway was just hoping that a cam that small wasn't producing such big numbers..
nhraformula
11-06-2005, 10:21 AM
That is very true.. never took that into consideration... EH oh well i'm not buying that cam anyway was just hoping that a cam that small wasn't producing such big numbers..
while i dont have a pulley nor ported throttle body, my cam which is bigger (224)
put out 379 rwhp
NeeD4SpeeD
11-06-2005, 08:22 PM
while i dont have a pulley nor ported throttle body, my cam which is bigger (224)
put out 379 rwhp

Thats a number thats more like it... Still good 4 RWHP if you ask me.. I'm just hopin to push nicely over 400RWHP and if you hit a high 300 with your 224 hopefully i can follow your path :beer3:
vettenuts
11-07-2005, 04:05 PM
maybe with a good set of heads and all the bolt ons.

As previously noted, the car used for this dyno also had heads. I would say that cam with bolt on's will put you in the 355-360 neighborhood.
NeeD4SpeeD
11-07-2005, 07:35 PM
As previously noted, the car used for this dyno also had heads. I would say that cam with bolt on's will put you in the 355-360 neighborhood.


Sounds about right... Heads will compliment the cam and push it through the 400 mark as seen on the dyno sheet
Redbull
11-10-2005, 10:17 PM
looks good to me!
oztrack
08-19-2006, 06:01 AM
My car made 369rwhp on a Mainline Dynolog dyno - which is like 440 dynojet rwhp. It has the same cam, 1.8 rockers, 25% UDP and Ported Heads.

Its also run 11.414 @ 118.6mph weighing in at 3600lb
It has 3.73 and a SS3600
unnatural aspirations
08-23-2006, 01:55 PM
Alot Of Dyno Charts Dont Say They Used Ud Pulley, Fast 90 /90 Or Even Electric Water Pump. Thats Like Altleast 30 Rwhp There Alone