PDA

View Full Version : new times, finally low 8's

keliente
11-04-2005, 03:09 PM
Ran @ Mooresville last night...

8.15 @ 87.6 mph with a 1.79 60'. I was really happy with it, feel like it has a bit more in it for next week too.

2000 Z28 6 speed...lid, headers, catback, 4.10s' and drag radials.
keliente
11-04-2005, 03:09 PM
http://www.pcmforless.com/images/crap/kelly.mov
Zacks 97WS^
11-04-2005, 04:31 PM
Great run, did you find out why the ABS light came on?

Jim (Zack's Dad)
keliente
11-05-2005, 07:18 AM
Yeah it went off right as I went down the road. It trips on the dyno too - I think it had to do with all of the burnouts I was doing...since the front wheels weren't moving and the rears were, the abs system wasnt too crazy about that ;)
JLSain
11-05-2005, 12:16 PM
LOL. Outta town and still can't stay away from the car websites. LMAO. Car junkie. :)
Bob'sWS6
11-05-2005, 04:12 PM
Nice times. What type of suspension setup do you have (i.e. LCA's, panhard rod, etc..)?
keliente
11-05-2005, 08:40 PM
Nice times. What type of suspension setup do you have (i.e. LCA's, panhard rod, etc..)?

nothing yet. I put some bilstein HDs on it because the decarbons were worn out, and put new springs on the front but left the rear at stock.
12secondv6
11-07-2005, 11:40 AM
Congrat's

Possibly due to wheel sensor's seeing rears spinning and fronts not moving
Bob'sWS6
11-10-2005, 12:56 AM
I didn't read the part about the 4.10's. Besides the ring and pinion gear, what else is needed for the swap to the 4.10, and can a 3.90 be put in? I'm going to be swapping out the 3.42's in the near future, so I just wanna hear your impressions.

Thanks
keliente
11-14-2005, 05:32 PM
There are no 3.90's available for our cars, which is sad, because it would be the perfect compromise between a 3.73 and 4.10. The only thing you need is a new crush sleeve & new pinion nut, but it is a good idea to change out the bearings while you have it all apart...I wrote a how to for it that covers it.

www.keliente.com/gears.htm
Bob'sWS6
11-15-2005, 10:02 PM
Ahh i'll pass on installing the ring and pinion, but thanks for the link. I believe i'll have to pay additional money, as my car has the Torsen LSD. Cute pic, you definitely don't look like my mechanic :p
I'll be getting the 4.10's, provided I keep this car.