BLinker problem *PLEASE HELP*

[Ws6Noob]

MY blinker works.. Although when i press my left turn signal on my blinker it stays LIT(both in the dash, and outside of the car). IT dosnt constantly flash like a blinker should. Where does this problem stem from?? Perhaps some faulty wires, i'm not sure what it could be.

[Hurley711]

That means it needs to be replaced. At least on my LS1 it does. If it lights but doesn't flash time for new bulb

[Ws6Noob]

But the light itself still gets lit up... So if it dosnt blink somehow it needs to be replaced?

And which light, the front parking light or the rear...

[Hurley711]

Whenever one of bulbs goes bad it still lights up it just doesn't flicker for turning.

[Ws6Noob]

Cool thanks so much. One last question... I turned my left turn signal. WAlked to the front parking light and that is compltely out.. That is probably the problem- How do i replace that?

"Whenever one of bulbs goes bad it still lights up it just doesn't flicker for turning."
The back left taillight is lit up, but as you said above it could still be bad. I think its the parking light thats the problem though.

So how do i replace it.

['99 SLP#24]

The one in the front that is out is your front blinker. What year is your car? You have to get to the light to take it out. The bulb is on the top side of the light housing.

[Ws6Noob]

I have a 02 ws6. ITs funny because im going to do the BRASS GEar install today aswell. I guess it would be a GREAT time to change the bulb aswell. What size bulb is it?

['99 SLP#24]

I believe it's a 3157 but check with the parts store when you pick them up it could be a 3057. Yeah that's the perfect time to do it. I would go ahead and replace both if you're doing both headlights. Just make sure you don't lose the rubber o-ring the goes between the socket and the housing!!! It will start leaking if you do! Good luck!!!

[Ws6Noob]

aye it just needed a new bulb afterall.