Turbo Kits for a 6.0 liter GAS motor

[Reggie West]

Guys I have a 6.0 gas motor that I want to put a turbo kit on.

I want more torque out of the motor so I can tow a 12,000 fifth wheel.

I am shooting for 500 to 550 ft lbs torque will be enough and not kill the motor.

I know I will need an upgraded fuel pump and injectors.

Any suggestions?

Thanks

[1fastcamarosss11]

not to do it. good luck
jeremy:zoom:

[Reggie West]

That is the best advice anyone on here has?

That is pretty bad.

[2000RamAir]

A Vortech Supercharger will do the trick, we have done many of these on 6.0 trucks and they are very fast and tow fantastic.

[Firehawk]

Why don't you try that Squires Remote-mount turbo? They can probably fix you up with something nice. I've seen nothing but good things said about them so far.

[Reggie West]

Thanks for the info guys I will check them out.

[Full Race Javier]

we did a single on a 6.0L a few months back...i forget what the whp/trq #s where though. i will try and dig them up...iirc they were above 5xxwhp/trq on low boost with pump gas.

some pics

P trim/60-1
http://www.full-race.com/prototype/chevy/chevy_turbo_01.jpg

http://www.full-race.com/prototype/chevy/chevy_turbo_02.jpg

http://www.full-race.com/prototype/chevy/chevy_turbo_03.jpg

http://www.full-race.com/prototype/chevy/chevy_turbo_05.jpg

[Corona-Extra]

I would look for a banks twin turbo kit.. tons of low end torque.. just what you need to pull crap around with ease all day long we put a “Big Hoss Bundle” on my cousins...04 6.6L Duramax and saw right around +120 hp and +300 lb-ft torque.. we pull a 24foot loaded down cow trailer around all day long.... take a look at bankspower.com :usa: