PDA

View Full Version : Can An Aftermaket Stall Coverter Hurt An Engine? Help

mglangley21
05-03-2007, 09:26 AM
Will A Yank 3300 Stall Coverter Cause Any Kind Of Engine Damage
fastform
05-06-2007, 05:04 PM
A high stall converter is only one part of the equation. The converter ALONE will not cause any engine damage.
SteveC
05-25-2007, 06:50 PM
No, however it will play hell on the stock transmission, you should get a TransGo shift kit, and a B&M 24K cooler, for your year vehicle, the TM should not be an issue.

SteveC :)
00ssSLP
05-25-2007, 07:55 PM
Do a lot of research on finding someone who knows what they are doing when you have the internal tranny work done. I spent $2400 on a build for my A4 and it kept burning up 3-4 gear clutches. It was getting so bad the tranny would burn them up in one day and every time I pulled it out it was $200. I had the tranny out 4-5 times so do the math, $2400+$800=Ripped the F*ck off. So like I said I can't stress it enough do your research.
LETHALxLS1
06-01-2007, 08:45 PM
http://www.performabuilt.com/

I was told instead of a rebuild go with one of these. The guy who told me about them had nothing but good things to say.
juiced99ws6
06-02-2007, 05:09 PM
http://www.performabuilt.com/

I was told instead of a rebuild go with one of these. The guy who told me about them had nothing but good things to say.

:yup: install the trans yourself and you are looking at 1600$ out the door for there stage two transmission.
juiced99ws6
06-02-2007, 05:09 PM
and they will build you a stall converter as well. it helps with there warrentee process to buy the converter from them
LETHALxLS1
06-02-2007, 05:21 PM
Hey I think you reccomended it to me. What stall did you go with juiced?
I got a price of 300 to put mine in so I am going with that since my back is screwd.
Also do you need a tune if you get a different stall? thanks