Transmission Help

[clg82]

Just got my car back cause the transmission went out!!! they put in a 9 clutch transmission with a shift kit......works great except........now when i really get on it and the rpm's get up there it sits at red line for a while until i let off the gas and get on it again then it shifts fine.......why would them putting in a new clutch pack and shift kit affect where my shift points are ......isn't that the computers job and how do i fix it............

[bills98ta]

Even when you let it in OD ? Everytime I mod anything, I'm reprogramming my shift points... I do know that my programming only works in OD though.

[clg82]

it does it only in overdrive for some reason......do you think that the programmer would help me or hinder me?

[juiced99ws6]

get it tuned...

[bills98ta]

Yes, Get it tuned !!! It should fix you right up !!!

[tblu92]

YES you need a tune--with shift kit--you should delete all of your torque management and set all your shift times in every gear to "0" for adaptive learning---You are skipping over the shift points and heading toward the "in gear "rev limiter---thats why you are at the red line---part thottle shift points need to be re calibrated--line pressures should be set back to stock--All thses are pretty common procedures for instllation of a shift kit--

[clg82]

YES you need a tune--with shift kit--you should delete all of your torque management and set all your shift times in every gear to "0" for adaptive learning---You are skipping over the shift points and heading toward the "in gear "rev limiter---thats why you are at the red line---part thottle shift points need to be re calibrated--line pressures should be set back to stock--All thses are pretty common procedures for instllation of a shift kit--

whoever i go to will they know to re tune all of that kind of stuff you just talked about? and is it all computerized or what?

[tblu92]

whoever i go to will they know to re tune all of that kind of stuff you just talked about? and is it all computerized or what?

they should know what to do if they are good tuners---all these things are tables in your computer--that can only be changed with a full blown tuner and not a handheld unit-I could give you the table #'s and a brief description
of each