Torque Converters

[ls1speedster]

what are the specs...and the brand that all of u guys prefer as torque converters.....2500 or 3000....

for a stock 2002 trans am
also what is the size of the rear end...

[nhraformula]

anything under 3k is a waste.
i have a tci streetfighter 3000

[Transam388]

Agreed on the above, do not waste your time on anyting less than a 3000 stall. I also have a TCI 3600 stall. I have used Yank convertors also and that was a good one as well.

As far as the rear end I have a Moser 12 bolt but my stocker actually never failed. I changed my rear end out before I was left at the track one day after a break. If you start getting more mods and all and especially with a TC you should start looking into a Moser or Strange.

[Tman]

3200 Midwest Technologies

[Hawk241]

Sorry but not to be rude, but I think you should take your time and read the stickies above and posts below before asking whats already been asked and being answered.

[nhraformula]

Sorry but not to be rude, but I think you should take your time and read the stickies above and posts below before asking whats already been asked and being answered.

if everybody did that, there would be very little posts. each post brings different opinions and such which only benfits everybody.

[Hawk241]

yea your right..:whistle: Oh look, its the Predator! :lmao:

[nhraformula]

yea your right..:whistle: Oh look, its the Predator! :lmao:

opps, sorry, just like every other fireslough owner( that also has his car number in his username) you are correct in giving answers. instead of stating an opinion on a stall, you tell him to use search, this isnt the other ls website.
dickheads like you are of zero use to this or any other site:hifinger:

i guess if i was a hawk owner, id be pissed also, overpaying for an f-body and all.

[Silver Streak]

Vig 3600 here.. stock rear, just 373 gears now. And I feel like I am on borrowed time with the tranny and rear with how I drive..

[Hawk241]

No, sorry 241 is not my car number. I thought the reason for being able to view the posts was to read and hopefully learn, which is why I was making the suggestion, since his question "on what stalls guys are using" is the number one sticky! F.Y.I., Overpay for the hawk...I bought the car with 19,000 miles on it, and stole it from the guy. Maybe you can explain to all of us how to overpay for an f-body, we love these cars, they dont make them anymore and we pay for our passion.

[BlackHawk]

i guess if i was a hawk owner, id be pissed also, overpaying for an f-body and all.

:eeek: :squint:





:wall:

[Gav'sPurpleZ]

I'm running a 3200 Yank SS

:bounce:

[oneBADDz]

VIG 3600 here. great stall. make sure you get a lockup. Don't be scared and go smaller, driving slow my car almost drives like it's got the stock stall so there is no reason to go smaller. Just get a good stall. TCI has been having TONS of problems lately and it's recommended not to use them by Texas Speed. Other brands of cheap stall stall too freely and you feel like you're reving way too high all the time. you get what you pay for

[svt_eater]

Nothing wrong with teaching a man to fish.

I'm not sure where this overpay for your Hawk came from, but I pretty much got mine at the cost of a Trans Am, and actually was less than what the WS6 with the Collectors Edition package before I got the deal. It's just not cool knocking eachothers rides. We are all car fans, just keep it clean and everyone will be able to enjoy their differences.

I am not a Mustang fan, but if someone has a nice car, and it happens to be a Stang, then I don't try to publicly humiliate them on a message forum unless all are aware of it being in good fun. This trash-talk is distasteful and is why I stopped reading the LS1 forums for a few years. I get sick of this so fast I wish the SLP forum was still up. This stuff didn't happen on there.

That's my $0.02 worth!

[nhraformula]

Nothing wrong with teaching a man to fish.

I'm not sure where this overpay for your Hawk came from, but I pretty much got mine at the cost of a Trans Am, and actually was less than what the WS6 with the Collectors Edition package before I got the deal. It's just not cool knocking eachothers rides. We are all car fans, just keep it clean and everyone will be able to enjoy their differences.

I am not a Mustang fan, but if someone has a nice car, and it happens to be a Stang, then I don't try to publicly humiliate them on a message forum unless all are aware of it being in good fun. This trash-talk is distasteful and is why I stopped reading the LS1 forums for a few years. I get sick of this so fast I wish the SLP forum was still up. This stuff didn't happen on there.

That's my $0.02 worth!

if somebody didnt make a cheap comment about the picture in my avatar, i would of left the comment out.

[slims00ls1z28]

PI vigilante 3600. As far as rear/gears go Moser 9 inch with probably a 3.70 (ordering the chunk tuesday haven't decided on the 3.70 or 3.89 yet, got the 9 inch sitting on the porch though just waiting on the $ to get here for the chunk :mel: )

[Hawk241]

if somebody didnt make a cheap comment about the picture in my avatar, i would of left the comment out.

nhraformula made the exact same comment the Firebird page, when some one put up the post "whats a Firehawk"..:squint:

[nhraformula]

nhraformula made the exact same comment the Firebird page, when some one put up the post "whats a Firehawk"..:squint:

its always when somebody says something smart first.

[Stretchs T/A]

Yank SS3600, 2.5 STR, thru stock 10 bolt, with 3.23 gears

[Hawk241]

Nice choice, thinkin about the same one, I have 3.23's also, let me know how your launch is racing wise, I believe your going to want drag radials or E.T. streets...

[0rion]

fuddle 3500 2.0 str through a strange 12 bolt with 3.73's

nhra and hawk, just let it go. no reason to keep beating that dead horse.

[Hawk241]

Copy that Orion, by the way, How do you like the Fuddle, I was tossing around that or Yank ss3600?