I need your dyno numbers

[Mr. Luos]

Without charts. Unless you link them. Just don't want several pics of charts cluttering the thread too much.
Looking for....

Screen name --- Model --- Year/Tranny -- Date -- Brand of dyno -- RWHP -- RWTQ -- N/A, N2O, SC
I will keep a seperate log for non-LSx cars as well if it is needed.


EX:
Mr. Luos --- Trans Am WS.6 --- 1999/M6 --- 11/04/06 --- DynoJet --- 531.1 RWHP --- 481.3 RWTQ --- N/A
Through a Moser 9" with 4.11's.
I don't have this chart scanned in as my freaking scanner crapped out and I never replaced it. If there are doubters, I can snap a pic of it. :yup:

Feel free to add info to your post if related. Like gears, stall, rear-end, etc. as these can effect numbers a bit.
I will be updating this often. But I am going to let it get some replies first. :yup:


Also...please keep discussion about the numbers to other threads please. This is submissions only.

[DanWS6]

DanWS6 --- Trans Am WS.6 --- 2002 --- A4 --- 3/17/07 --- DynoJet (DynoPro, Denver, CO) --- 478.8 RWHP --- 582.9 ft/pounds --- D1SC 11psi and 3800 Stall

[99blueZ]

'99blueZ --- Camaro Z28 --- 1999 --- M6 --- 11/06 --- Dynojet (speed inc.) --- 316rwhp --- 328rwtq --- N/A

Mods - SLP lid, SLP bellows, Pro 5.0, and Borla.

More added since - new dyno #s comming in summer.

[mrr23]

mrr23 --- formula --- 1999 --- auto --- 01/13/06 --- dynojet macedo motorsports orlando, fl --- 481.85rwhp --- 486.51rwtq --- Nitrous

http://stealthram.com/familypics/formula/dynos/nxnytrex/navstest5.jpg

VHP Airlid
VHP Filter
VHP MAF Ends
VHP Heads
VHP 1.8 Accelerated Lift Rockers
VHP 062 Cam 210/218 .551/.551 112 LSA
Bassani Optimum Length Headers
Bassani 2.5" Metallicats
Bassani Tru-Duals
Yank SS3200
3.73 Gears
Ny-trex 150 n2o Single Stage

[mrr23]

mrr23 --- formula --- 2000 --- auto --- Date --- dynojet macedo motorsports orlando, fl --- 474.62RWHP --- 476.76rwtq --- Nitrous

http://www.stealthram.com/familypics/formula00/dynosheet/navsdryandwet.jpg

SLP airlid
K/N filter
Bassani Tru-Duals
Yank PY3400E
3.73 gears
two stage n2o 100dry/150wet
ASP under drive crank and alternator pulley

[Mr. Luos]

I need more!!!!!
Come on guys/gals...I know there are plenty more than have numbers.

[94 Formula]

94 Formula.."Old Car"---99Z28---M6---3-12-07---Dynojet San Diego,Ca---437rwhp--398rwtq---N/A

Stage II Heads "243 Castings"
MMS 233-233-578-113 lsa
Ported LS1 Intake.."F.A.S.T coming soon"
Mac 1 3/4 Mids with custom Catted 2.5" y-pipe and Loudmouth
K&N FIPK
Ported and Polished T/B
Ported Granetelli Maf
LS1 Edit
3.73 Gears

[Jon7I2]

Jon7I2 --- Formula --- 1999 --- M6 --- 11/06 --- Dynojet (speed inc.) --- 321 rwhp --- 328 rwtq --- N/A

Mods: Dynatech Supermaxx LT header system, Lid/belllows, and cutout

[Mr. Luos]

Keep 'em coming.

I will get it set it when there are enough to make it worth it. :yup:

[TheKitchenSink]

TheKitchenSink --- WS6 --- 2001 --- Auto --- 04/07 --- Dynojet (P&L Motorsports) --- 408 RWHP 379 RWTQ --- NA

Heres the chart
http://i45.photobucket.com/albums/f96/BigTruck6o2/scan0004.jpg

[Selah]

Selah --- WS6 --- 2002 --- M6--- 04/07 --- Dynocom (Harris Speed Works) --- 337 RWHP 357 RWTQ --- Lid, Magnaflow Catback w/cutout open

http://greatsave9.smugmug.com/gallery/2776937/12/147875449#147946218-L-LB

[BIG D's SS]

BIG D's SS SS 2000 M6 10/05 Dynojet GMMG Marrietta Ga 359 RWHP and 360 FTLBS TQ N/A.

[HUNTER02SS]

Hunter02SS --- 2002SS Camaro --- RPM Stage4 4l60e Dynojet
Dynolab 15Psi-815 RWHP 765 RWTQ Twin Turbo Truck Manifold Kit.

[Stretchs T/A]

Stretchs T/A --- Trans am WS6 --- 2002 --- A4 --- 4/19/07 --- Dynojet@Speed Inc. --- 393.7rwhp --- 363.9rwtq ---N/A

Full bolt ons, 3600 stall, stock 10 bolt, 3.23 gears

[moez28]

moez28--1998 Z28--M6 4.10 stock rear--SuperFlow Dyno @ S&R Racing in Lexington, KY--March 11, 2007--465 rwhp 388 lbft SuperFlow #'s--N/A
-DynoJet corrected #'s 491 rwhp 412 lbft
-348ci Forged pistons and rods 2002 block bored 0.010" over
-Lingenfelter CNC ported 853 cast heads (year 2000 program)
-Heads milled 0.070", with -4cc valve reliefs yeilds around 11.3:1 compression with the stock graphite syle gasket
-TREX V2--243.1/249.5 .613/.619 110 +2 (May be for sale soon)
-All boltons except EWP
-Dual cutouts right after Pacesetter 1 3/4 headers

[SSwt00SS]

SSwt00SS--2000 SS--M6--SLP Lid--Ls6 Intake--Patriot Stage II Ls6 Style 59cc Heads--Comp Cam 224 (and supporting upgrades)--LT's/ORY--SLP LM Catback

http://i136.photobucket.com/albums/q171/SSwt00SS/DSC00070.jpg

[SSmoky01]

SSmoky01 --- Camaro SS --- 2000 --- A4 --- 5-5-07 --- Mustang Dyno ---Texas Motorsports in Round Rock,Texas --- 322 RWHP --- 332 ft. pounds --- N/A-SLP LID, SLP LOUDMOUTH 1, Granatelli MAF, SLP COLD AIR 74K miles

[Mr. Luos]

Keep giving them to me please!!!

I will get the listing started soon.

[shady milkman]

SSwt00SS--2000 SS--M6--SLP Lid--Ls6 Intake--Patriot Stage II Ls6 Style 59cc Heads--Comp Cam 224 (and supporting upgrades)--LT's/ORY--SLP LM Catback

http://i136.photobucket.com/albums/q171/SSwt00SS/DSC00070.jpg

i cant see shit..too bright!

[SSwt00SS]

i cant see shit..too bright!

let me work on getting a better pic of my dyno sheet taken, Shady...

[Sworaz]

Sworaz..95 Trans Am..M6...Dyno Tune Performance..382rwhp 352 rwtq
LE2 Heads, Cam, Fully Ported Intake. Full bolt ons.

[mrr23]

i cant see shit..too bright!

i can see it just fine.

[9T8W66]

9T8W66---`98 Formula---M6---7/15/06---Dynapack Dyno---Rocket Rides-Rochester Mi.---300 RWHP--322 RWTQ.--SLP Lid, Flowmaster SOTL catback
109,000 miles and on the original clutch.

[Mr. Luos]

Thanks everyone.
I will try to get something started this weekend. :yup:

Keep them coming!!

[Big-K-Performance]

Big-K-Performance 2002 Camaro SS 6-Speed 4-25-07 Dynojet (DynoTune Speed and Performance, dynotuneusa.com Watertown, SD
383 RWHP 370 RWTQ

Mods- Thunder Racing Custom Camshaft - 230/236 .592/.602 112 LSA
Kooks Headers and Y-pipe
LS6 Oil Pump

Factory SLP Blackwing Lid

Installed a D-1 and getting it in for the tune soon so I'll post the results too

[98tadriver]

Do you want us to post our CORRECTED or UNCORRECTED #'s, from the looks of it I'd say some of these bolt on guys are posting uncorrected, since they are higher.


98TADRIVER --- Pontiac Trans Am --- 1998 --- M6 --- 3-24-07 ---DynoJet --TTPerformance in Passaic Park, NJ --- 342 RWHP --- 362 ft-lbs SAE CORRECTED. ---full bolt ons, (SLP lid, smooth bellow, LS6intake, UD pulley, flowtech LT's, ORY, Magnaflow catback, cut out open) thru my stock 3.42 geared 10bolt, untuned
spraying a 75 or 100 wet shot in the near future will get those #'s up as soon as i dyno!

UNCORRECTED was 362 rwhp and 380 rwtq

[BigBenz]

http://i5.photobucket.com/albums/y196/swedishsweety/rudy/dynoboost.jpg


This is my 2000 z28 at 7.7 lbs of boost D1sc with long tubes and the twin intercooler kit. Its only long tubes and the d1sc. I have a fuel pump and 42 lb injectors. Its was hot in the shop too. That why i only hit 7.7 lbs of boost, that and i have a 4.25 inch pulley on the d1sc

[danziger]

Danziger --- Z28 --- 2000 --- M6 --- 2/2007 --- DynoJet DTP Racing --- 468rwhp --- 460rwtq --- N/A (no numbers on the spray yet)
Old heads/cam/nitrous combo:
N/A- 436rwhp/420rwtq Wet 100shot-576rwhp/590rwtq

[Mike Moore]

Mike Moore --- Trans Am --- 2002 --- 4L60E --- 6/23/07 --- Dynojet @ Vamp Racing --- 337rwhp --- 349lbs rwtq --- N/A
Edelbrock Long Tubes and off road y-pipe,Corsa Catback, and SLP lid, tuned by Keith Mccord

[JonB]

JonB --- Z28 --- M6 --- 1/19/2007 --- Dynojet @Rollins Automotive --- 358rwhp --- 369lbs rwtq --- N/A

Mac mids, catted 2.5 y-pipe, hooker catback with cutout, slp lid, Ftra, asp underdrive pulley, ported tb, smooth bellows, tuned my jermey formato.

[djvaly]

my dyno... djvaly... 04/19/2007... 488rwhp 480tq @ LG Motorsports in Wylie TX... I need to get another uptodate dyno now after a few supporting rear mods...

http://i166.photobucket.com/albums/u118/DjValy/101_0456.jpg

[D!ck]

259rwhp 365rwtq, but i got probley 290+rwhp and about 400rwtq at 2500rpm. damn truck power range sucks for dyno. but kills on da screets. dig dig dig :titslap:

[rel3rd]

rel3rd - Camaro SS - 2000 - 4L60E - 7/30/07 - Mustang Dyno - Performance Specialties Inc. Glen Burnie, MD. - 322rwhp - 318rwtq - N/A

111,000 miles
Stock converter
323 gears
Jet Hot longtubes and ORY
Borla adjustable catback (homemade plate w-3/4" hole)
SLP lid w/Fram Airhog filter
Home ported throttle body

:)

[N20LT4]

"Cherry" - 1993 Camaro Z28/A4 - Dyno'd @ Force Fed Performance in Sacramento, CA on 6/29/07

Stock Bottom End (125k)
Full Bolt-Ons (too much to list)
Red Line Performance 1-3/4" Long-tube Headers & Y-pipe
Random Technology Cat
Flowmaster 2-chamber/3" Cutout
Dyno Tune Nitrous Oxide Wet Kit (100 jets)
Aeromotive Fuel System
TPIChips.Com custom tune
Built 4L60 (Non "E") by Trans Tech
Yank Super Stock 3200 stall
Auburn Pro Diff with SLP 3.73s

411/452

Recently Added as of 7/26/07-
Speed Demon Motorsports custom grind
Comp "R" Lifters (mines work fine)
GM Performance Parts Pushrods
Updated Tune

No #'s yet.


"Glory" - 1996 Corvette LT4 Coupe - Dyno'd @ Force Fed Peformance
on 7/05/07

HOT Cam
Exotic Muscle 1-3/4" Long tube headers/off-road x-pipe
Corsa RSC Cat-back
SLP Claw cold air kit
Ported stock 52mm TB w/ CPR Air Foil
LT1 EDIT Tune

362/346

[9t8z28]

I will have my car dynoed on Friday!

[TNTramair]

TNTramair----WS.6----2000----M6----Oct 06'----Dynocom (Harris Speed Works)----632rwhp----643rwtq----HSW Direct port 200shot

mods: ls6 heads with valvetrain upgrade (rockers, springs, etc etc), torquer v2, stock bottom end that decided it had enough and went kaboom :D, Fast 90, NW, Kooks, Gmmg.

[D!ck]

I will have my car dynoed on Friday!

you ever notice your avatar? i aint no expert on nuttin, but dat aint no 98 :hmm:

[9t8z28]

you ever notice your avatar? i aint no expert on nuttin, but dat aint no 98 :hmm:

Your pretty smart! I can't help it if I still like my LT1 powered SS more than I like my new one!

[mplss]

I thought my #'s looked pretty good until I saw this list-damn Im weak.
see sig.

[SSwt00SS]

Mr. Luos, you're gonna hate me for this. here are my new numbers from just installing the ported FAST 90/90 only and retune...:D please update my numbers. TIA...Old #'s 409/386=======> 444/395...

http://i136.photobucket.com/albums/q171/SSwt00SS/Dyno_1.jpg

[djvaly]

and it was retuned as well, Brian... :) good numbers man!

[Mr. Luos]

I will be updating this weekend.

Congrats Brian. Great numbers.
My intake will be coming off soon enough...got to get her ported. I want 550RWHP through a 9". :lmao:
Slowass is a freaking dyno queen. :lmao:

[94 Formula]

94 Formula.."Old Car"---99Z28---M6---3-12-07---Dynojet San Diego,Ca---437rwhp--398rwtq---N/A

Stage II Heads "243 Castings"
MMS 233-233-578-113 lsa
Ported LS1 Intake.."F.A.S.T coming soon"
Mac 1 3/4 Mids with custom Catted 2.5" y-pipe and Loudmouth
K&N FIPK
Ported and Polished T/B
Ported Granetelli Maf
LS1 Edit
3.73 Gears


I am adding the below items and am hoping to get 450-460rwhp N/A.

42lb Injectors
85mm Professional Products Intake Manifold "Port matched to my heads"
85mm Professional Products T/B
Disconnect EGR / EGR Blockoff
New custom Dynotune.

STS coming for Christmas along with 550-600rwhp.

[djvaly]

I will be updating this weekend.

Congrats Brian. Great numbers.
My intake will be coming off soon enough...got to get her ported. I want 550RWHP through a 9". :lmao:
Slowass is a freaking dyno queen. :lmao:

go slowass iz ya b-day! :wave:

[Lawnman]

95 gt. lawnman. 5 speed . dynojet @IPS 421 rwhp and 411 rwt. turbo with 6 lb's of boost.

[9t8z28]

9T8Z28 --- Camaro --- 98' --- M6 --- 8/3/07 --- Mustang Dyno / Harris Speed Works --- 340 RWHP --- 337 RWTQ --- N/A

-Lid
-LS6 Intake
-160 stat
-SLP 1.85 Rockers
-QTP LTH's
-ORY
-Pypes Catback
-4:10/10 bolt

[Mr. Luos]

Updated.

Please follow the format. Makes life much easier. Hard to make up info if you don't give it to me as well.

[9t8z28]

Updated.

Please follow the format. Makes life much easier. Hard to make up info if you don't give it to me as well.

What am I missing?

[Mr. Luos]

You are on there. :yup:

[bluefields88]

Bluefields88--- Camaro SS --- 2000 --- A4 --- 8-7-07 --- Dynojet (Superior Automotive, Anaheim) --- 306 RWHP --- 317 ft lbs. Torque --- N/A

SLP lid, SLP air bellows, Flowmaster cat-back, TB bypass, K&N filter

[Hot SS]

HOt SS---camaro ss ---2001---A4---8-10-07---dynojet,---328.04 rwhp,---339.21 ft/pounds---N/A

Pacesetter LT, 3" xpipe flowmaster race mufflers, SlP lid pkg, SlP MAF,MSD wiers and NGK plugs, shiftkit.

[bluefields88]

update? :)

[Mr. Luos]

Sometime this week...I promise. :lol:

[Mr. Luos]

update? :)
Done.

8/15/07

[HUGGER ORANGE SS]

HUGGER ORANGE SS--- Camaro SS --- 1999 --- M6 --- 5-27-07 --- Dynojet (DynoPro Denver, CO) --- 741RWHP --- 726 ft lbs. Torque --- Blown

Here's Mine...

Curtis. You have a Chart for this? Would you email me as well?

thanks buddy..

[FuhBreezeE]

Fabrizi ------------- Trans Am --- 1999 --- A4 --- 9/7/07 --- DynoJet --- 424.5 RWHP --- 401.4 RWTQ --- N/A

[djvaly]

hey Fabrizi, bring ya dyno sheet at the gtg tonight so I can take a pic of it and post it...
your camera broke down, good thing I was there and got the dyno on video :yup: :rant:

[FuhBreezeE]

Update? I can post the dyno sheet tonight if need be.

[djvaly]

:yup: the copy I took for you is too fuzzy, night shot no good.

[nate_the_great17]

trans am ws6------ 396 rwhp------383 lbs trq-------dynojet(speedtek in haltom tx)

[Christibelle]

here is mine from 09/08/07
http://i203.photobucket.com/albums/aa13/scrmn99/dyno.jpg

[mplss]

Mplss---camaro SS---1998---6 spd---7/26/07--dynojet-hitech motorsports---345rwhp---352rwtq---n/a.

[FuhBreezeE]

http://i74.photobucket.com/albums/i256/FuhBreezeE/P1000060.jpg

[WEZONIT]

WEZONIT --- Camaro SS --- 2000 --- M6 --- 09-06-07 --- Dynojet (Whitman Racing) --- 340 RWHP --- 343 RWTQ --- N/A

Mods: Slp Lid, SSRA, LS6 Intake Manifold, Ported TB, TBB, FRA mod, Pacesetter LT's, Catted Y-pipe, MagnaFlow Cat-back

The A/F rations were read incorrectly so don't pay attention to those.

http://i181.photobucket.com/albums/x10/superj420x/DYNOSHEET2.jpg

[Mr. Luos]

REV_IT_UP-TA and nate_the_great17, please follow the format.

Updated as of 9/12/07.
Also...please use this thread for submissions only. Discuss sheets and numbers in other threads please.

[powermad]

powermad --- C5 Corvette --- 2000 --- M6 --- 9/17/07 --- DynoJet (Henderson Performance, New Braunfels, TX) --- 395 RWHP --- 364 ft/pounds --- N/A
Cam plus bolt ons, stock LS1 heads.

[Mr. Luos]

Updated 9-24-07.

[DanWS6]

DanWS6 --- Trans Am WS.6 --- 2002 --- A4 --- 9/16/07 --- DynoJet (DynoPro, Denver, CO) --- 548.2 RWHP --- 509.4 ft/pounds --- D1SC 11psi and 3800 Stall

[nomorefords]

nomorefords---camaro z28 ---2001---a4---Dyno Dynamics (JBA Racing S.D., CA)---313rwhp/337rwtq---AFR 11.3 so I pretty sure could get decently better #'s, but I just took her in to get my tune finished up with the data log numbers, it definetely feels more powerful and shifts better!!!

[bowtiemonster]

had my 200 camaro done 8/9/07

321.78 hp at the rear wheels with 329.92 torque

[JOHN_DEERE_LS6]

john_deere_ls1.... trans am.....1999......m6.......10/6/07......dynojet, VT lansing michigan..... 330rwhp....343 ft/lbs

airtemp 90 degrees 57% humidity

mods in sig

[roblelp]

roblelp…Camaro SS…2000… o6/07…DynoJet ( Sunshine Performance)…624 HP…542 ft/pounds



The modification made to my 2000 Chevy Camaro SS.

Grannatelli High performance Mass Airflow Senor
90mm Throttle Body withFAST LSX 90mm Intake Manifold
Comp Cams Roller Cam Duration, .050 Intake 224-Exhausts 228. Valve Lift Intake .581-Exhaust .588
Roller lifters
AFR 205cc LS1 Mongoose Street Head, (2.020 intake and 1.600 exhaust valves)
Pro Charger D-1 SuperCharger
Bassani Y Pipe Exhaust
Bolar CAT Back Exhaust with Chrome Tips
Edelbrock’s LS1 Headers (short)
Spec 3 Plus Clutch
Moser rear end with 4:10 Gears
10mm Taylor Wire Set (plug cables)

I have the chart just not sure how to upload it. Can someone explain how to do it?

[kickarss]

01' SS. air lid, factory cat back, slp longtube, dyno tuned, 373 hp 386 torque. Dynomite dynonometer. Sarasota Fl. No cats.

[roblelp]

Here's my dyno run numbers.

roblelp…Camaro SS…2000… o6/07…DynoJet ( Sunshine Performance)…624 HP…542 ft/pounds


http://i226.photobucket.com/albums/dd201/roblelp/CaronDynoJet.jpg

http://i226.photobucket.com/albums/dd201/roblelp/Elpers_run003.jpg

[Mr. Luos]

Updated 10/9/07.


If you weren't added, you need to submit your numbers using the correct format.
Like this...

Mr. Luos --- Trans Am WS.6 --- 1999 --- M6 --- 11/04/06 --- DynoJet (DynoPro, Denver, CO) --- 531.1 RWHP --- 481.3 ft/pounds --- N/A
Just copy and paste. Then change the info.

[rel3rd]

rel3rd --- Camaro SS --- 2000 --- A4 --- 7/30/07 --- Mustang Dyno --- PSI~Glen Burnie, MD. ---322rwhp ---318rwtq --- N/A



Best ET with that tune, fwiw, 12.66@107

[JEFFLS1Z28]

Jeffls1z28 Camaro Ss 2002 M6 10/13/2007 Dyno Jet Modern Musclecar Motorsports At Ups Car Show In Laurel Md. 360.1 Hp 371.22 Tq N/a
All Free Mods Slp Lid And Bellows Mass Air Sensor Ends Veraram Velocity Stack
Jet Hot Lt Off Road Y Pipe Magnaflow Cat Back Custom Predetor Tune
Stock Heads And Cam No Internal Mods .

[powermad]

New blown numbers:

powermad --- C5 Corvette --- 2000 --- M6 --- 10/17/07 --- DynoJet (Henderson Performance, New Braunfels, TX) --- 478 RWHP --- 424 ft/pounds --- S/C
ECS blower cam, P1SC@4 lbs,bolt ons, stock LS1 heads.

[rel3rd]

rel3rd --- Camaro SS --- 2000 --- A4 --- 7/30/07 --- Mustang Dyno --- PSI~Glen Burnie, MD. ---322rwhp ---318rwtq --- N/A



Re-tuned today...for 226 cam and 3600 stall

rel3rd - Camaro SS - 2000 - A4 - 10/25/07 - Mustang Dyno - PSI/Glen Burnie, MD. - 344rwhp - 314rwtq - NA

:zoom:

[fastfirebird2002]

Fastfirebird2002--TransFormula--1999-A4--8/27/2006--Powerhouse Performance--309.8RWHP--317.62 FT/LBS

Slp Loudmouth Exhaust,Slp Lid

[98formy]

98formy------ Formula ---- 1998 --- A4 ---10/24/07 ---- DynoJet --- 364 RWHP --- 355RWTQ --- N/A

[vaticano]

Vaticano --- Trans Am WS.6 --- 2002 --- M6 --- 09/16/07 --- DynoJet (DynoPro, Denver, CO) --- 642.1 RWHP --- 593.5 ft/pounds --- D1@8#'s

[roblelp]

Vaticano --- Trans Am WS.6 --- 2002 --- M6 --- 09/16/07 --- DynoJet (DynoPro, Denver, CO) --- 642.1 RWHP --- 593.5 ft/pounds --- D1@8#'s

What all modifications have you done?

[HASTINGSRJ]

HASTINGSRJ---00 SS Camaro Vert----M6---cant remember date----dynojet----

N/A---403 hp 379 tq

N20--- 506 hp 481 tq N20


Mods in Sig

[Mr. Luos]

Updated 11/3/07.
Thanks everyone...keep giving the numbers and let this listing grow. :yup:

[ARDLS1]

ARDLS1- 01 Formula----A3--dynojet (ARD houston)---877HP--716tq---N2O http://www.ls1.com/forums/attachment.php?attachmentid=15222&d=1194384213 http://www.ls1.com/forums/attachment.php?attachmentid=15223&d=1194384275

[FuhBreezeE]

Fabrizi ------------ Trans Am ----- 1999 --- A4 --- 10/20/07 ----- DynoJet --- 403.3 RWHP --- 436 RWTQ --- N/A

[Kyle C]

Dynojet, the rest in sig.

[mrr23]

update on the black car

mrr23 --- formula --- 2000 --- auto --- 11/08/07 --- dynojet 248 norris motorsports winter garden, fl --- 622.88 RWHP --- 589.75 RWTQ--- Nitrous

dynosheet
http://www.stealthram.com/familypics/formula00/dynosheet/408/nitrousrpm.jpg

[dlbrando]

dlbrando ---Camaro SS --- 2002 --- M6 --- 11/09/07 --- Dynojet Mayhem Motorsports --- 332HP --- 350.2Tq --- N/A, SLP lid and Lt's, exhaust is just 2 mufflers hanging on the LT's

Temp was 68 and humidity was 16%

[chieftransam]

chieftransam -------- Pontiac TA ---- 2001 --- M6 --- 11/12/07 --- DynoJet,(RPM, Garner, NC) --- 404 RWHP ----- 390 RWTQ ----- N/A

[FuhBreezeE]

update on the black car

mrr23 --- formula --- 2000 --- auto --- 11/08/07 --- dynojet 248 norris motorsports winter garden, fl --- 622.88 RWHP --- 589.75 RWTQ--- Nitrous

dynosheet
http://www.stealthram.com/familypics/formula00/dynosheet/408/nitrousrpm.jpg

Shouldn't that say 662rwhp? Not 622 :dunno:

[djvaly]

SAE net power, so his is RWHP. even LG dyno charts tell you SAE horsepower, not RWHP on the chart.

[Mr. Luos]

SAE is RWHP corrected to a universal consistent.


Please keep discussion to other threads in here.


Updated as well. 11/13/07

[chad2001ls1]

chad2001ls1-z28-m6-11-18-07-dynojet-dynopro-407rwhp-368tq-

[Mr. Luos]

Updated. 11/25/07

[HUNTER02SS]

Hunter02SS --- 2002SS Camaro --- RPM Stage4 4l60e Dynojet
Dynolab 15Psi-815 RWHP 765 RWTQ Twin Turbo Truck Manifold Kit.

UPDATED#"S! Switched to AFR Head's and a 6 Speed and 18#'s of Boost
1089rwhp and 1055rwtq!!!

[02.LS1]

lighty mod'd 2002 LS1 with nitrous...( 150 )
471 rwhp and 493 tq :_)
this is done on a dyno dynamics, dyno: redding, cali.

[svc707]

http://img.photobucket.com/albums/v482/svc707/0326071509.jpg old graph while tuning

svc707 -------- Pontiac TA ---- 2002 --- M6 --- 10/06/07--- dynopack,(synergymotorsports) --- 739 RWHP ----- 656 RWTQ ----- 9/10 psi belt slipping D1SC

[Mr. Luos]

lighty mod'd 2002 LS1 with nitrous...( 150 )
471 rwhp and 493 tq :_)
this is done on a dyno dynamics, dyno: redding, cali.
UPDATED#"S! Switched to AFR Head's and a 6 Speed and 18#'s of Boost
1089rwhp and 1055rwtq!!!
Please follow the format and I will add your numbers. :yup:
If you submitted but don't see your name...you left something out. Please update and I will add you. I want to keep this as uniform as possible, so please make sure to give all of the information I asked for. Would be easiest if you just copied one of the other entries and changed the info to yours.



Updated 12/8/07