My Single Turbo Setup... Progress Pic's

[NA$TY-TA]

On alot of other boards i post on i updated them with my progress pics from Stenod Performance.... I guess when this site switched over my old screen name was lost.... and my post count.... oh well....

For those who dont know...
This is a Single Precision GT42-76 Turbo.
1 3/4 Primaries with 2 1/2 crossover
5" Downpipe off the turbo stepped down to 4" to fit thru the K-Memeber.
Turbo Smart 48MM Wastegate and a Tial 50MM BOV.
The motor has been lowered almost 2" so custom motor mounts were made.
Bell A2A Intercooler.
I was raped by AP Engineering on my last Forged 370ci motor so Best Machine out of Detroit is building it for me. 8.87:1 comp.
A Carl Rossler PowerGlide and Strange Spooled Rearend round out the drivetrain.
Stenod is also doing a 10 point Chromoly Cage for me at the same time..... Heat will stay but the A/C has been long gone........
Thats the mock-up Motor in the pic's since my motor is still being redone.
Now onto the Pics......

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01693.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01694.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01695.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01696.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01697.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01698.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01699.jpg

Gutted for the new cage....
http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01700.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01701.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01702.jpg

http://www.itlxlr8.com/images/kyle/buildup2/07OCT05/DSC01703.jpg

Here's the link to my whole Build-up....
http://www.itlxlr8.com/build2.htm
Kyle

[MOLESTER]

first i wanna say that setup looks bad ass, now im gonna ask you who did most of the work on the turbo setup. I've been researching for a good turbo setup for a while now but im really likin yours.

[NA$TY-TA]

first i wanna say that setup looks bad ass, now im gonna ask you who did most of the work on the turbo setup. I've been researching for a good turbo setup for a while now but im really likin yours.


Stenod Performance in Troy, MI there site is linked in my sig... and here....
http://stenodracing.com/index.html
Ask For Joe.
Kyle

[NA$TY-TA]

More update Pic's

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/1.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/1.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/2.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/3.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/4.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/5.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/6.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/7.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/8.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/9.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/10.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/11.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/12.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/13.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/19oct05/14.jpg

Thanks again guys for some badass work.
Kyle

[MOLESTER]

lookin good, keep the pic's comin even though your makin me jealous. but great job to the guys at stenod performance.

[NA$TY-TA]

Thanks man

[badass67]

The pics are great. The plumbing on the turbo setup is really nice! What kind of power are you looking at?
Obviously, this is not going to be a daily driver, with that cage.

Looking good so far. Good luck.

[KNanthrup]

lookin real good

[NA$TY-TA]

The pics are great. The plumbing on the turbo setup is really nice! What kind of power are you looking at?
Obviously, this is not going to be a daily driver, with that cage.

Looking good so far. Good luck.

Me and Joe (Stenod) Have been talking and we dont see a reason why we cant make 900rwhp..... Prob going to run 21-22 pounds of boost on kill and a lil milder when it does drive on the street.....

Now streetable is all in the eye of the beholder...... now i only have to dive 1.5 miles each way from my house to go to work..... so itll be worth it to me...... around town for a few things and cruises yeah..... long trips... thats a neagative:haha:

Kyle

[GatorSS]

Wow, that's quite a setup! So, how much $ is all that gonna set you back?

[NA$TY-TA]

Wow, that's quite a setup! So, how much $ is all that gonna set you back?


u sure u want to know .... h aha LOL when the motors done this time ill have about $9K in it...... then the turbo kit, cage, Rossler glide, Strange 12 bolt, fuel stuff tuning and labor......

Alot....
Kyle

[GatorSS]

Me and Joe (Stenod) Have been talking and we dont see a reason why we cant make 900rwhp..... Prob going to run 21-22 pounds of boost on kill and a lil milder when it does drive on the street.....

Now streetable is all in the eye of the beholder...... now i only have to dive 1.5 miles each way from my house to go to work..... so itll be worth it to me...... around town for a few things and cruises yeah..... long trips... thats a neagative:haha:

Kyle
Just think of all the fun doing that 1.5-mile run to/from work daily!:drivin: :burnout:
:zoom:

Unless there is a lot of traffic....:dodge: :ripped: :ahh: :rant:

[BULLET99Z28]

Now thats how u build a car, looks good, u gonna run full interior, drag or road race maybe?

[NA$TY-TA]

Now thats how u build a car, looks good, u gonna run full interior, drag or road race maybe?


It'll be mostly a drag car that see's some street use.... ill drive it to and from work on most days.... I only live a mile and a half from work.... and around town to cruises and what not.
It will be trailored to the track and ill keep most of the stock interior for now and down the road i plan on two Kirkey race seats.
Kyle

[Full Race Javier]

nice, street legal drag car :rockon:

[MOLESTER]

im curiouse to know what it weighs all put back together with that cage

[NA$TY-TA]

im curiouse to know what it weighs all put back together with that cage

We will have to wait and see what the grand total weight is when its all done..... i do know that the cage material was 65lbs... not bad for being so much... its a chromoly cage.
Im sure it lost some weight from before now that it has a tubular K-member and A-Arms, No A/C stuff at all, and a way lighter transmission.... we will see ill be sure to post up.
Kyle

[denn454]

i've seen some incredibly nice plumbing before. what you have is right up there with the best of them.

but isn't that turbo a little small? its no small turbo i know but I've spent a lot of time with turbo buicks and that turbo is pretty big but not huge even by the standards of a little 231 ci v6. i would think you would be wanting to go a little bigger to feed the motor.

either way i'm sure its going to scream.

[NA$TY-TA]

i've seen some incredibly nice plumbing before. what you have is right up there with the best of them.

but isn't that turbo a little small? its no small turbo i know but I've spent a lot of time with turbo buicks and that turbo is pretty big but not huge even by the standards of a little 231 ci v6. i would think you would be wanting to go a little bigger to feed the motor.

either way i'm sure its going to scream.

with the 76mm wheel it will be enough for around 900rwhp... i do have plans/an option to upgrade to a 80mm wheel when i do max this one out.....
It will reach mt ET goals of a Mid 9 sec pass so when i do that i start planning for faster...:haha:

Kyle

[02Vortech]

God damn Joe Rogan!!!!!

[marcus769]

Wow.. Thats so cool! Wonder when it will be my turn to post pics of a turboed Trans Am!? (my dream car!) Until then, i will remain watchin all of you have the fun!!! http://www.business.mnsu.edu/classes/fall05/mgmt200%2D06/hinklm/images/tv.gif

[Somebody09]

What kind of K-member is that you have? And will it keep everything in its stock location?

thanks,
-somebody

[NA$TY-TA]

What kind of K-member is that you have? And will it keep everything in its stock location?

thanks,
-somebody


Its an AJE K-Member that came with out Motor mounts so no it wont work with what you have. The motor was also lowered 2"s

Kyle

[NA$TY-TA]

The project is coming along pretty fast now..... i just need kevin to send me some higher rez pics :jest: :jest:
Dual -8an out of the sump in a Earls Y-Block
-10an feed, -8an return
A brand new sumped stock 98 Tank.... my old one was rusty as hell....
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/fuelsystem.jpg
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/fuelsystem2.jpg

Aeromotive Proseries Fuel Pump
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/fuelsystem3.jpg

http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/fuelsystem4.jpg

FMIC Finished and Mounted
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/intercooler.jpg

Rossler Powerglide
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/powerglide.jpg

My Motor and Trans are in For Good.
http://itlxlr8.com/images/Car%20Buildup%20Pics/9DEC05/motorinstalled.jpg

Its geting closer every day..... im excited :devil:

Kyle