PDA

View Full Version : Need ideas for Cam on my set-up

onefastss223
10-11-2005, 08:09 PM
Ok guys heres the situation...I'm in need of some specs on a good cam for my setup. I want a cam that has good low-mid range power b/c the cam I have in it right now(C1 hammerCam) has no low end power. Some people have mentioned the LPE GT2-3 cam but I'm wandering if a custom grind cam would be the better way to go. I would like a cam that isnt very loud but loud enough to know its there. I'm planning on running around 10 lbs of boost after the heads/cam are installed. Any advice is greatly appreciated.
I'm planning on running the Patriot Stage 2 LQ9 heads with the cam. These heads and cam will be run on a forged 347 if that helps any.

thanks for the help guys,
chris
Rob
10-13-2005, 08:27 AM
If you want something that lopes, take the GT2-3 out of the hunt. Its as stock as stock can be at idle. But it is a good cam if you're running boost.

I'd go custom as that will tailor exactly with the mods you plan on running.
trtturbo
10-13-2005, 09:09 AM
We did a 226 220 .570 .564 on a 115 and midrange was great. It was on a car running 7.5psi.
There wasnt much lope at all though
NA$TY-TA
10-13-2005, 01:18 PM
i take it, its a turbo setup.........??
onefastss223
10-13-2005, 01:26 PM
No, ATI P1SC set-up...
NA$TY-TA
10-13-2005, 01:35 PM
No, ATI P1SC set-up...


ok cool....
I had a D1SC on my car before my new turbo setup.
I have always loved a 224/230 on a 114LSA .570/.580 lift.
now i ran a 230/236 on a 114+4 .592/.602 with no problem with an A4.
You can hear the lope better with my cam then the one i said.... but the 224/230 will still sound about like you want.
I know Futral Makes one... the F7 if i rememebr correctly.

Kyle
onefastss223
10-14-2005, 07:56 AM
Will the F7 make good low-end power??? Well, I'm going to call cam-motion/futural today and get a custom-grind or the F7 perhaps...thanks for the help guys...

chris
Ed Blown Vert
10-14-2005, 08:04 AM
We did a 226 220 .570 .564 on a 115 and midrange was great. It was on a car running 7.5psi.
There wasnt much lope at all though

Hmm I went the other way. Cam specs in sig.
NA$TY-TA
10-14-2005, 01:01 PM
Ed,

Yours is what most go with for a SC setup.... they way he went was the way most go for a turbo setup.... they way i said it earlier as a reverse sounded wierd... i know
Kyle
onefastss223
10-22-2005, 06:15 PM
I ended up going with a 222/230 .574/.580 114+4 from CamMotion...thanks for the help guys