PDA

View Full Version : Sender for trans temp guage

Gregg1LE
10-09-2005, 08:55 PM
What kind of fittings do I need to mount the sender in the pan? Any other options ?
SteveC
10-15-2005, 04:02 PM
If it is an automatic transmission, there is a pressure port on the side of the case above the transmssion linkage, the size is 1/8 NPT. I get very accurate readings from that location.

SteveC :)
Gregg1LE
10-19-2005, 09:24 PM
If it is an automatic transmission, there is a pressure port on the side of the case above the transmssion linkage, the size is 1/8 NPT. I get very accurate readings from that location.

SteveC :)


Is there tranny fluid at that location? I don't want to read case temp.
SteveC
11-13-2005, 07:55 PM
I really do not know the answer to that, however the reading I get there is within 1 degree of what auto tap says it is.

SteveC :)
LS1-450
11-14-2005, 04:27 AM
Is there tranny fluid at that location? I don't want to read case temp.


Yes, there is. There was fluid on the plug when I removed it to mount the sender in that location.