Need opinions on this

[porksoda]

I need opinions on this setup:
XE 227/233 cam with a 560/569 lift on a 1.6rr (114lsa)
7.2 Hardened Pushrods
Pro Magnum 1.6rr

I may buy this but I want opinions from people that know more than me! This is my daily driver so I'm not looking to kill gas anytime soon. Also I'm not planning on building a major drag car or anything, I just want a nice lope and good power. Hopefully better than a hotcam too. I already have Mac Mid Headers, Magnaflow Exhaust, and Moroso CAI to go along with this package. (There is also some other little bolt-ons and suspension stuff but I won't go into detail) Let me know your opinions on this and what kind of numbers it will make.

[mcamp001]

make sure you change springs, retainers, etc, also. And most important, get it tuned after install! That's a fairly aggressive cam, and with a good tune should drive and idle pretty well. I would guess in the range of 380-385rw

I am (right now) putting in a XE-R 230/230 on a 114 with .591 and expect 390-395, assuming you have an 01 or 02 LS1. I have most bolt ons, etc

[eddierox]

Check these links out for a good understanding of whats involved for good aspiration for your desired applications.

http://www.compcams.com/catalog/

http://chevyhiperformance.com/techarticles/86218/

http://www.themotorbookstore.com/ls1...8-engines.html

http://www.motorsporttech.com/fbody_engine01.asp

[tbojbob]

You mention 1.6 rockers and 7.2 pushrods, is this going into a LT1?

[porksoda]

yes this is going into an LT1