jdearles
10-04-2005, 01:36 AM
Well we started out I was sick 326 and 329 and AF was bad as well with an 11.0 - 11.75 at WOT. So on the second pull we pulled some fuel and pulled a 377/372 which was close but then it was slightly lean so we added some fuel back in and pulled the final dyno of the night TA DA!!!
380.56RWHP / 375.75 RWTQ SAE
389.93RWHP / 384.78 RWTQ STD
AFR was 12.9x - 13.06
Temp 89.9*
Humidity 36%
Pressure 30.29 in-Hg
On a side note the eibach pro kit is coming off. When I put my car on the dyno and we were strapping it down I noticed the exhaust pipe above the panhard bar is chushed!!! I believe I may need a new exhaust from the intermediate pipe back or at least the 1 pipe that runs over the axle. I may have a little HP in there...cutout, and some simple stuff might get me over the hump.
I will post a graph later. I am tired, just got in from Mobile 20 min. ago.
Mods are listed on my web page. Heads/TR 224 cam/jet hot headers and Y-pipe.
380.56RWHP / 375.75 RWTQ SAE
389.93RWHP / 384.78 RWTQ STD
AFR was 12.9x - 13.06
Temp 89.9*
Humidity 36%
Pressure 30.29 in-Hg
On a side note the eibach pro kit is coming off. When I put my car on the dyno and we were strapping it down I noticed the exhaust pipe above the panhard bar is chushed!!! I believe I may need a new exhaust from the intermediate pipe back or at least the 1 pipe that runs over the axle. I may have a little HP in there...cutout, and some simple stuff might get me over the hump.
I will post a graph later. I am tired, just got in from Mobile 20 min. ago.
Mods are listed on my web page. Heads/TR 224 cam/jet hot headers and Y-pipe.