cams ????

[Ridinfilthy]

i bought a comp 2220224 566568 cam and was wondering what every one else was running with the cam and stock heads any help would be appreciated:uzi:

[Y2KPewterSS]

Do you mean that you got a 220/224 566/568 cam? What LSA is it as well, probably a 112 or 114. What other mods do you have, we need more details about your setup to help you out here. Also, are you a auto or manual tranny?

[Ridinfilthy]

112 lsa auto , 3.73, slp catback , pacesetter lt, tc1 3000, nitto's, iwas hoping for around 375 rwhp and maybe 12.20's what do you think i hear that is a fairly mild cam but i think it is a good cam i will eventually get the heads ported or just buy new ones not sure yet??

[Y2KPewterSS]

112 lsa auto , 3.73, slp catback , pacesetter lt, tc1 3000, nitto's, iwas hoping for around 375 rwhp and maybe 12.20's what do you think i hear that is a fairly mild cam but i think it is a good cam i will eventually get the heads ported or just buy new ones not sure yet??

I see tuning and LS6 intake missing from your setup, did you forget to mention them or do you not have them currently. I could see you running low 12s assuming you can 60' well, but I would see you more around the 360RWHP range. Don't worry about dyno #s from an auto though :)

[Ridinfilthy]

aight thanks man i will have a stock manifold for a little while but i will have it tuned on the dyno when installed!!

[SSwt00SS]

it will be close but i don't think you will see the 375 that you are hoping for. it's a little smaller than the 224 that i currently have. pre heads and ls6 intake i was sitting at 366rhp/356rtq, and i have an m6...get all the work completed and done, and post up your numbers. i'm thinking between 355-365 rwhp for you...