pics of tubbed or mini-tubbed t/a

[BIGTIREDT/A]

i have a 2000 t/a. i'm about to get the back half done. just looking for some pics of street cars (t/a) that have big tires under them.

[LiL LeO]

if I were you I will upload pics later but I have 295 's on the back and the look pretty good with the offset but next im going to get the 305's cuz the look a hell of a lot bigger so just a helpful hint.

[1QuikWS6]

How big do you want to go? I run 315/35R17's on TTII 17x11 rims on the rear of my T/A. The tire/wheel combo is flush with the fender at the top (does not protrude past fenders).

You have to do some slight 'BFH' mods to the front/inner wheel well area and grind the corners off your bump stop brackets to gain clearance but the work is minor. Never had any rubbing problems whatsoever.

315's have a sidewall x-section of 12.4", tread slightly smaller

[1 badblack transam 01]

How big do you want to go? I run 315/35R17's on TTII 17x11 rims on the rear of my T/A. The tire/wheel combo is flush with the fender at the top (does not protrude past fenders).

You have to do some slight 'BFH' mods to the front/inner wheel well area and grind the corners off your bump stop brackets to gain clearance but the work is minor. Never had any rubbing problems whatsoever.

315's have a sidewall x-section of 12.4", tread slightly smaller
Will you upload some pics of that please? Thanks

[Eric @ DMS]

What size tires are you planning. Many run 315's without tubbing. We have 315's on a couple of our shop F-bodies. Next up on our current project...335s! Now that's some tubbing!