PDA

View Full Version : just installed my clutch


blue02Z
01-16-2007, 08:41 PM
well i just installed my ls7 clutch and flywheel. also a new slave and master with the drill mod. did it all myself with a little help from one of my buddies and just letting ya'll know it was a royal pain in the ass. thanks for listening to me vent.

Wesman
01-16-2007, 11:01 PM
What was so bad?? Dropping and reinstalling the trans?? Thats usually the worst part, the clutch swap itself should be easy. Of course bleeding the clutch system can be a PITA too, if you have to do that.

Let us know how it is, lots of guys have had good luck with the LS7 clutch kit.

Danger731
01-17-2007, 03:30 AM
Took me 8 hours for mine. PITA

blue02Z
01-17-2007, 05:39 AM
yea, getting the trans out was ok, but stabbing it was a diff. story. them master cylinder was a tough too.

DarknessLS1
02-04-2007, 08:54 PM
i threaded(only a lil) the long tranny mount bolt to help guide the tranny back in on the bellhousing. slids right in. its alot easier after the first time:)