Odd MAF question. . . .

[Duffster]

I went to cleaning my engine today and went so far as to remove the SLP airbox cover off of my car. I've had the car just over a month and don't know the specifics on engine work done on it . . . .yet!
When I pulled the airbox cover off I just kept cleaning and cleaning. . .
I did not damage the MAF, but looking at it I saw etched into the side of it:
"Z06 88 V +5%"

Does this sound familiar to anyone? I measured the thing at 3.5" across.

Thank you!

Duff

[Duffster]

I've recently heard tell that some of the 01' Z's had some mixed Z06 componants (block/intake/clutch/cam) and such. . .confirm or deny? ? ?

Duff

[MadSeason]

what's the part number on it, some 01's and 02's got the ls6 block but that's all, and since 01 they all got the z06 intake

[MadSeason]

btw 3.5 across the MAF is not the z06 maf

[BackinBlack02SS]

3.5" is about 88mm. Your measurement is most likely not exact, so there is a very good possibility that it is a Z06 MAF. BTW, I am assuming you measured the ID, not the OD.

[MadSeason]

I measured the ID and OD on both the z06 and ls1 mafs, the only measurement that was 3.5 on the nose was across the ls1 maf