Bottle heater stats

[Tucdog]

Anyone remember the company where you could get the higher temp thermostats for the NOS heater? I believe they were 98* stats.

I did the purchase about a year and 1/2 ago but can't remember. My heater is not working properly, ie: is shutting off before getting up to temp and I believe this is the problem.

bought an extra set but can't find the damn things

[Eugenio_SS]

don't remember the name... but it's the same name of company that does the one in the system... if you have the system, look @ the thermostat. instead of being 30, it's the 35, if memory is correct... I remember that the #s are 'C, and know it's 5'C more than the one in the system already... but can't remember the exact #s.
There was a user called Sep1234 that came up with the idea and ordered a few roughly 3 years ago... I also think you need to get at least 10 thermostats, if not more.

[Sep1234]

Here I am. The thermostats are 95 F. Actually, the thermostats are rated in Celsius. The NOS thermostats are 30 C. I ordered 35 C. I bought them through Pepi. I would like to provide you a link, but I cannot posts links until I have at least 10 posts. The minimum order is $100, which equates to about 20 thermostats (10 pairs). It is more than frustrating that all of my posts are gone, that I had to create my user name all over again, and that I "wasted" all the time that I invested into my earlier posts. Not to get off subject, but one way that you can buy those thermostats is to buy my 2001 WS6 with the nitrous kit that I installed. I have my post in the For Sale section. I cannot post a link here, because I do not yet have 10 posts. :rolleyes:

[Tucdog]

Thanks fellas. I dug through the garage and found my backup pair. As you guys are the consumate pros, a question. The reason I was trying to find these is that my heater is not working right. It will come on and the heater will get quite hot and then shut off (maybe 2 minutes). Am I most likely right in thinking the stats are causing this? I have the stats under the heater strap, not under the heater itself.

Thanks again.

[camaro_ss_97_]

i just bought a nitrous set up and did not get a bottle heater. do i really need one?? or can i run it without it. i am new to nitrous so any help would be great. thanks

[Tucdog]

I am in Central Florida and at first did not have a bottle heater. I could never really get the PSI up where I wanted it (~950 - 1000 psi), so I put on the heater with the higher stats and it made a world of difference.

Where are you in TN? I have property outside of Dunlap up on Keagle mountain. Am trying to get a job at UTC (or another college) and relocate up there. Had enough of the hurricanes down here!

[camaro_ss_97_]

cool thanks for the advise i live close to lynchburg,tn i am like 1hr to chatt.

[HotRodV6]

Bottle Heaters will increase your consistancy.

[Sarge]

It should be required.....it is the only way outside of a propane torch to get the pressure where you need it....900-1000 lbs is what you must have...

[Galen]

I am just curious about the purpose of the thermostat on the bottle heater. I could care less how hot the bottle is, I just want my pressure around 1100psi...and that will be at different temperatures depending on the amount of N2O left in the bottle. I do have a pressure regulator on my bottle that cycles the heater according to pressure on my system.

Galen