What suspension mods do you have done?

[Y2KPewterSS]

Just like the title says, list up your suspension/handling mods.

Mine listed in order of install:

BMR Strut Tower Brace
BMR boxed weld in sub-frame connectors
BMR boxed lower control arms
BMR relocation brackets for the lower control arms
BMR chromoly adjustable panhard bar
BMR lowering springs
KYB adjustable shocks(fixing to bite the dust)
BMR drive shaft safety loop
BMR upper panhard relocation kit
Cross-drilled & slotted rotors
BMR adjustable torque arm(awaiting install)

Best mod listed above IMO is the sub-frame connectors and the worst is the KYBs. I am going to be replacing the rear KYBs for Koni SA ASAP.

['96 Z28SS]

This is one area i havent hit very hard, but its my next in line.

BMR Shock tower brace
Bilstein SLP Valved shocks
Slotted and Cross-drilled rotors
Hawk HPS Pads

Next on the list is subframes.

[mrr23]

bmr shock tower brace
bmr adjustable tq arm
spohn adjustable trailing arms
hotchkis panhard rod
comp engineering adjustable rear shocks

[Hurley711]

BMR SFC
BMR LCA
BMR PHR
Heater hose mod lowered my rear 1 full inch on both sides, cost $5
BMR STB, took it off after a week, noticed nothing
1LE FSB
Bilstein HD shocks, BY FAR the best mod to date:yup:
Brembo blanks & Hawk HPS pads

[Carlos01SS]

GC coilover springs 500#linear fronts 150#progressive rears riding on Koni DA's 4 full sweeps from firm fronts 1-1/2 sweeps from soft rears, Strano 35mm hollow front swaybar, LGMotorsports G2 dual rod-ended adj. PHR and SFC's with optional v-braces...I also have a chrome G2 STB, but I never put it on, same with the LCA brackets...

[The Guz]

Here is what I have done:

Koni SA's
Hotchkis Lowering Springs
Hotchkis Front and Rear Sway Bar
Hotchkis Trailing Arms
Hotchkis Strut bar
Hotchkis Adjustable Pan Hard Bar

[Eugenio_SS]

almost stock...
with some minors add-ons/mods :devil:

[SexOnWheels]

almost stock...
with some minors add-ons/mods :devil:

+2 I would not want to compile a list!

[Carlos01SS]

almost stock...
with some minors add-ons/mods :devil:


Hey man how you dooin???

Long time no type!

Hope all is well. :)

[Y2KPewterSS]

almost stock...
with some minors add-ons/mods :devil:


:lmao: :lmao: :lmao:

[SiggyZ]

BMR Shock tower brace

I plan on adding a set of boxed BMR Subframe connectors (welded) in the future.

[vikingramair]

Here is my suspension mods

BMR prog spring
BMR shock tower brace
Strano Swaybars f+r
G2 adj phr/adj lca/adj up/low A-arms
Koni Sa around
UMI SFC
Reloc batt to the trunk

[Brianss1]

BMR chrome moly >
Strut Bar
SFC
LCA
Panhard Bar
Torque Arm
Sub Frame Connectors
Spohn Rear Sway Bar
DTS 12 Bolt,3.73
QA1's soon

[Warbird]

Factory WS6 springs.
Bilstein HD shocks.
32mm front swaybar.
1LE front and rear swaybar mount bushings.
Energy Suspensions poly endlinks front and rear.
Hotchkis adjustable panhard bar.
SLP strut tower brace.
BMR boxed subframe connectors.
Spohn poly rear control arms.
WS6 wheels with Firestone Firehawk tires in 275/40/17.

Plan on buying an aftermarket torque arm sometime this year.

[Fastcar]

Hotchkis polished strut tower bar
SLP valved Bilstein shocks
Energy Suspension polyurethane sway bar body mounts, end links and torque arm bushings
UMI Performance bolt-in sub frame connectors, rear lower control arms,
non-adjustable Panhard rod bar, and driveshaft safety loop bar (ties the sub frame connectors together underneath the driveshaft) (UMI front K member, upper & lower A arms with new ball joints soon)
Brembo blank rotors
Stainless steel brake hoses
:burnout:

[third_shift|studios]

box n laddered LCAs
UMI Torque arm [non adj]
35mm Front sway bar
Koni SA's w/ stock springs
HotParts 2pt STB

this spring:
Tube SFCs
adj panhard
nittos

[camarolvr69]

how much do swaybars improve handling? is the change as noticeable as shocks and springs?

[third_shift|studios]

OMG YES! it's less body twist and very attentive when you turn the wheel. a great combo is stiff shocks and a beefy sway bar

[cobrahunter]

Here's mine:

Suspension Technique swaybars (front & rear)
Global West tubular weld in sub-frame connectors
Hotchkis lower control arms
Hotchkis adjustable panhard bar
Eibach Pro-kit lowering springs
Bilstein shocks
Powerstop Cross-drilled rotors

[camaro_five0]

I only got a few things for the suspension, cuz I think it's all I really need!

Spohn SFCs
Spohn STB
Spohn LCAs
Spohn LCA relocating brackets

[third_shift|studios]

why did you relocate your LCA's if you're running @ stock height???

[davebowtie]

SLP strut tower brace
SLP bolt-in SFC (i'll weld them someday)
Eibach Sportline springs (I threaded some HD hose onto "dead" coils to even out the wheel gap frt. to bk.)
Koni SA's (havn't checked what they're set at yet)

I bought the car with these chassis parts on it already,
the only thing I've done is the "hose on the coils".
I also need to get LC arms and relocation brackets... the instant center is waaay off.

[Frankthetank]

BMR REAR SUSPENSION...adjustable ph and ta

[camarolvr69]

do you think this combo would work well for street/strip?
QA1 Rear Coilovers
Weld In SFC
Torque Arm
LCA w/relocation
Panhard Rod

[mrr23]

why did you relocate your LCA's if you're running @ stock height???


even at stock height, they are slightly upward on the rear side versus the front side.

[JonB]

BMR springs
BMR stb
BMR lca's and relocation brackets
CE subframes
Edlebrock torque arm
adj Panhard rod
Bilstiens

[lrader99]

1LE sway bars
Poly bushings on everything...helped soooo much
Eiback sportlines
Bilstein HD's
BMR SFC
Lakewood LCA's
J&L LCA relocation
BMR Adj. PH
Panhard Relocation
BMR transtunnel brace w/ torque arm(awaiting install)
Driveshaft safety loop
Poly engine and trans mounts
Edelbrock 3 point strut tower brace

once i get some money rolling im gonna add the whole BMR cradle assy

[tonyjnjz]

i notice non of u have adj LCA's listed......are they nessesary or just some beefy non ajd's???? .....and this is mostly for a street aplication as i dont do much drag racing at the strip....plan on lowering the car about an inch with bmr springs in the future as well