automatic lock trouble

[djsokal]

anyone ever have problems with the automatic locks? my drivers side door doesnt lock i have to manually lock it with the key.

[crashkev469]

I have trouble with the passenger side. I have to reach over and lock it. The dealer told me it would cost roughly 500 or so to fix it. I decided to reach over and do it.

[LS2Tuner]

Where do you live......? Is it could there?
If so I've seen lot's of issues with the actuaters in cold weather:cuss: .

[djsokal]

i live in san diego. doesnt the warranty cover that?

[GOT1GOAT]

Your warranty will cover it if you are within the 3/36 frame. My pass. side started to act up when it got cold-first indicater was when I pressed lock on the fob, my horn beeped liked 5 quick times but that was just alerting me that the door was not locking. It did this @ 5 or 6 times and now is normal(so far)

[djsokal]

thats exactly what mine does.

[GOT1GOAT]

I hope that it stays fixed because I really hate taking my car to the stealership and then to pray that they don't fug something up trying to fix.
I just read too many horror stories about them.

[cumstain killer]

My goat does the same thing, how did you fix yours?

[GOT1GOAT]

My goat does the same thing, how did you fix yours?

It fixed itself but for now (Knocks real hard on wood)

[third_shift|studios]

yep, my passenger side is out and my drivers side is going...stealership told me the same shit they'd fix it for 500. I said "sorry, i'll just reach over"

[borntosnag]

This may be a totally different issue, but I had problems with my automatic locks and had to use the key (which sets off the alarm -thank you gm). I have found if I point the key directly at the door, the locks work everytime. If I have the key in a different direction I have a hard time getting the door(s) to lock/unlock. Maybe I'm just on crack, but pointing the key seems to be the solution to my problem. Every other vehicle I have owned with keyless entry never had this problem. Just push the button and you were all set.

On a side note, is there anything more crooked than a GM stealership? If anyone reads this and is offended - tough. Truth hurts!

[cumstain killer]

Why dont they just recal for faulty locks????????????
It seems everyone is having the same problem.

[djsokal]

i took mine to the dealer and they had to order a part. they fixed it the next day
a week before the warranty ran out.

[0rion]

yup, bad actuator and for those lucky few that it "fixed itself". It'll unfix itself at some point. Mine did the same thing. It worked sporadically for a while then fixed itself then went out altogether and I couldn't even manually lock the door.

[snaggeltooth]

I am not having a problem with it , but will keep my eye out ...
Sometimes when I press the truck to unlock , I can hear the mechanism move and everything but truck still locked ... Anybody else had this ???

[LS2Tuner]

I am not having a problem with it , but will keep my eye out ...
Sometimes when I press the truck to unlock , I can hear the mechanism move and everything but truck still locked ... Anybody else had this ???

Yes probably 20% of the time.:cuss:

[05gtoautoX]

Took mine to the dealership yesterday, to fix a paint chip on the hood, and there is a TSB for the locks, They said the problem is in the PCM, so they'll have my car for 2 days(because they had to order it) I don't understand how it could possibly be in the PCM, seeing how it only does it when it's really cold outside. But oh well, the dealership has been preety good, and has not done me wrong yet. They even give me a rental car, a Grand prix GXP which is a nice car, and for everyday it's in the shop, it's less miles on the goat.

[0rion]

When they fixed mine it was the module in the door. They had to order it. I wonder if that's what they meant.

[GOT1GOAT]

Yeah, First I thought that the cold weather was causing it but as it got colder, it worked better(for now). My warranty is good til 11/07 time wise and I'll most likly have them fix the next door lock gimp go round so they can REPLICATE the "not so common" problem.

[05gtoautoX]

maybe, but they said "PCM" so I'm not sure, but they put the new one in and they said it fried it upon start up, and the car wouldn't start or anything so they say, I'm starting to get pissed off now, because they said it won't be done now till monday, oh well they break it they'll fix it.

[LS2Tuner]

maybe, but they said "PCM" so I'm not sure, but they put the new one in and they said it fried it upon start up, and the car wouldn't start or anything so they say, I'm starting to get pissed off now, because they said it won't be done now till monday, oh well they break it they'll fix it.

That gives you the whole weekend to BEAT the shit out of that GP. I'de put a 125 dry shot on it and go to the import street races!!:yup:
It'll do John Force burnouts on the kit!!!
Been there done that!! Just put the nozzle on the bottom of the air tube they will NVER know.

[rayboyred]

My door lock problem is a little different. I have a 2003 Ford F-150. The doors usually lock when I shift to drive. Recently, they have stopped locking automatically when I drive off. Instead, I'm having to lock them manually now. Has anyone experienced this problem. If so, what is the remedy?
Thanks

[slpgto2004]

i have trouble with the passenger side i think it gets jammed sometimes because if i move the look around some time it locks with the remote and then if i dont i have to reach over and lock it. and sometimes it unlocks and sometimes it doesnt so i think mine is jammed i have yet to look but im pretty sure

[kyemt]

anybody have a link to the tsb so i can print it out and get my passenger side fixed

[LS2Tuner]

anybody have a link to the tsb so i can print it out and get my passenger side fixed

If the service writer you deal with doesn't want to help then just call the Service Manager @ your dealership and he will take care of you.

[kyemt]

i work for the dealership part time on the side they will take care of it i just want to give them a starting point

[LS2Tuner]

i work for the dealership part time on the side they will take care of it i just want to give them a starting point

That should be VERY easy for you to pull up at work then. They are not made to be publis for many reasons. Ask any tech your cool with then to print it up for you if you want to have it for them prior to the wo.

[kyemt]

cool, i just do dealer transfers and crap like that but im going try to get in this week and talk to the service manger

[snaggeltooth]

here is a little advice if you are going to have your window or door lock worked on .... order the parts in advance ... Mine took 2 weeks to get parts ... Just got her back today ...