dvd parking brake

[slipping]

I installed an indash dvd hu but i do not know where to run the parking brake lead. is it one of the wires at the brake itself or some other location. and color. thanks!

[bigrondownhiller]

what head unit? the wire usually goes to ground side of the switch. check the instructions for the unit.

['96 Z28SS]

is there some dummy location you can put it so you can run the DVD anytie you want?

[slipping]

it is a dual 8181. i grounded the parke brake wire to the chassis and found the factory codes to diable it. thanks!

[ls1bandit]

i installed a switch with mine, i took the lead for the parking brake and branched off a wire from the amp relay, when you want it to play dvd's you flip the switch on.

[slipping]

i was going to use a switch, i got a lot of little ones laying around, but after i put in the factory disable codes, i didnt need to, so turned out to be much easier and i dont have to deal with the switch. thanks though!

[jerry trans am]

Just pull the brake up or down one click. this way the brakes dont engage but the headunit will read that it is on.