93 maro rs

[Camarokid]

yesterday i got my maro v6 3.8 and it tops out at 112, what do you suggest for a chip so i can go faster. also what kinda exaust, and someone was saying you can get a supercharger for 800$ is that true?
thanks

[dreaded_hope]

I'm confused...you say your car is a 93 RS? But it has a 3.8? :think: Are you sure it's not a 3.4L V6? Base model Firebirds and Camaros came with 3.4 V6's until midway through 95, at which point they switched to using the 3.8.

After we know for sure what engine you have we can help answer the rest of your questions for you.

[Camarokid]

the guy told me it was 3.8 i thought thats what rs's were

[Zboner]

look it up on google!

[Camarokid]

so it is a 3.4...he told me 3.8! asshole! maybe there was an engine swap...ill get back to you, im guessing 3.4 pry

[dreaded_hope]

http://www.cardomain.com/ride/478156/3

If your engine looks like this, it's a 3.4. If your engine says 3800 series II right on the top of the engine, then it's the 3.8.

[Camarokid]

3.4

[dreaded_hope]

The SC you are refurring to which someone happened to find it on ebay second hand for 800 bucks (dont expect to see one for this cheap too often, I've never heard of one going for that price) is for the 3.8 v6, I used to have it on my car before I took it off and switched to nitrous. They have alot of exhausts out there for your car, check out www.slponline, www.borla, anything really. Keep in mind that any catback for a Lt1 or ls1 will fit your car, with the only difference being the hangers, which any exhaust shop will be able to make work for you anyways. As far as programming, I'm not sure what programming you can do to get rid of governers with your 3.4.

[91Z28]

RS wasn't even an option until 1996 either.

[34v6needhelp]

any chip advise?

[BLACK02WS6]

why do you need to go faster than 112 mph?

[Camarokid]

why do you need to go faster than 112 mph?
civics fly past me after awhile...and why wouldnt you wanta go faster than 112, lots of time around here we set our cruises at 100...and this came from a guy that has a car that will do 160

the other night i raced, and i kicked ass at the start, but my car seems to take forever to get through second gear, any way i can fix this?

[Zboner]

buy an ELIS JUAN.

[dreaded_hope]

the other night i raced, and i kicked ass at the start, but my car seems to take forever to get through second gear, any way i can fix this?


Start modding! Start with intake and exhaust and then decide where you'd like to go from there.

[12secondv6]

How about slow down?

[98LSGUN]

How about slow down?
:werd: Learn how to drive the car first, take the money you would spend on some of your mods and take it to the track. Then figure out what you want to do from there...

[Black34v6]

amen. figure out what your car can do before you start throwing go-fast parts at it. even the smallest performance part could be more than you can handle (altho i doubt it with the 3.4...it kinda sucks to begin with).

do a head swap. yes its slightly a major undertaking, but it will wake the motor up like nothing else - and get you ready for any other mods you wanna do. i SO wanna dyno. im pretty sure im in the 210+ hp (185 rwhp) and 250+ tq (212 rwtq) range. I just gotta find out for sure :)

i need a injector upgrade (engine breathes pretty good..its all in the fuel delivery).

anyway. dont give up hope. the 3.4 is decent, just GM didnt put a lotta thought into it like they did the 3.8.

(p.s. for all of you that are gonna say the 3.8 > 3.4... why is it that im running stock gm parts (i didnt port or polish anything..i didnt get anything performance, i just used the updated parts from GM's factory shelf) and i have as much hp and more tq than you? no flames, just don't want people dissin my motor.)

[PaganEgyptian]

Well, they didnt put a whole lot of it into the 3.8 RWD anyways. The FWD engine has much more potential in the latter years.... I am in the 230HP/250TQ range, and I still get laughed at by the V-8 group. Even though I put down more than the 305 TBI/TPI V-8 crew. -Tim

[12secondv6]

Well, they didnt put a whole lot of it into the 3.8 RWD anyways. The FWD engine has much more potential in the latter years.... I am in the 230HP/250TQ range, and I still get laughed at by the V-8 group. Even though I put down more than the 305 TBI/TPI V-8 crew. -Tim

Dyno #'s don't mean that much when you can't put the power down effectively.

My last dyno N/A.... 180 rwhp and 200 rwtq ;)

[Black34v6]

lol. yea its all about the driver. ive got a lot to learn in terms of launching and stuff.