Im fabricating a new interior-possibly headed for the market.... and I need your help

[nine-eight]

how well do you like your interior? would you change it if you could? Im asking because currently, im designing an all new set of interior panels for my '98 z-28. ive currently got some very nicely drawn up designs for my personal car, which turned out so well that the fabrication shop im working with on this has suggested I consider spending some time to get some public input, and then approach the market with the new pieces. so, in turn, if I see a demand, I will start producing some new interior pieces for the camaro, with you, the enthusiast in mind. here are some general design cues that will be built in to the new interior. prices would be set at levels that are affordable. that is a priority.
1. revised speaker locations for better acoustics and tweeter locations for high-end component speakers
2. lighter weight than the stock interior. id rate the door panel at about 20 lbs. the replacement will hopefully be below 10.
3. higher quality materials with a more aggresive, yet refined design. currently im using a design that consists of formed carbon fiber, italian leather and brushed aluminum accents. im going for something that gives you the feeling of quality like a mercedes benz, or a porsche for example.
4. a bottle location, built into the center console, to house a 10 lb nitrous bottle, as well as a switch panel to house switches for anything from trans-brakes to electric fans.
5. revised stereo slot for your aftermarket stereos, as well as a 3 guage pod to replace the "dead space" left by the oversize stock stereo.

these are just a few cues. I cant give away everything, right? :)

let me know what you think, and ALL suggestions are considered.... maybe a discount for ls1 members :naughtywa


Eric

[02z28ls1]

:gotpics: OK-it's not really worthless-I just really wanted to use that smiley somewhere.That's a great idea-By all means make it performance oriented and goodlookin.The only thing I envy of the new GTO is the cooler interior.If I can think of some ideas to help you I'll get back on here.Keeping it affordable would be important-maybe even where you could just buy the console or the other panels separate and it wouldn't look bad with your stock stuff -kinda modular-if that would work with what you have planned.

[third_shift|studios]

YEAH DUDE POST PICS!!! that sounds sweet!

just make sure your stuff doesn't rattle-my interior rattles ALOT! and i can't stand it!

[graphicsgod]

Sounds cool, but need pricing and pics. And can you swing by Florida some time :D?

Right now I'm more intrested in a targa or t-top conv. It's too damn hot in here, I need to get more air in my DD car. I'd use the AC, but need to save on gas,.. you know.. But I wouldn't mind doing that later on.

Rob

[Hurley711]

How bout.....no rattles no rattles no rattles.....and less plastic less plastic less plastic

[Waveridr85]

I am very interested. Would be very interested in nice door panels that look factory, say lexus factory and match well with the rest of the car

[EVL LS1]

pics or ban! =)

[XtinKt]

interested as well but need pics

[third_shift|studios]

interested as well but need pics

damn, cuz! new interior and slick 2-tone paint job! you're car will be SWEET!

[XtinKt]

Thats the plan stan. The Trans am is my dream car. If i could have any car in the world it would be the trans am. Now to get it the way i like it...................

[Warbird]

Cup holders that actually hold something!

[Duffster]

http://i10.photobucket.com/albums/a101/Duffster-01Z/cupholder2.jpg
Just like the 3rd Gens needed?

[nine-eight]

hello all just checking back in... I just moved (local) so i have no internet connection at home ( im at a cafe now). anyhow, heres some updates for you, and keep the feedback coming!

02Z28Ls1- yes the panels are being designed with the factory original pieces in mind... so that you would be able to buy, say, just the door panels, or just the center section, and have it match with the rest of the interior. the affordable aspect is addressed below

dipherentdesign- the panels wont rattle at all.... thats what got me started on this. the stock speaker grille on the door rattles like a hyundai. again, no pictures yet but when i have a product mock up ill post em :)

graphicsgod- no targa top conversion yet :D unless you were looking for a one-piece style replacement t-top, that might be possible but id have to research the base design a bit haha.... ill let you know in the future :D

xtinkt.... stay tuned... once the base design is settled, there are quite a few things ive envisioned that i could change on the design for a customized panel(s), because i originally had this project in mind for a handful of people building custom hot rod late-gens, so there are some VERY nice accents and design touches that i have in mind... perhaps your own integrated set of two or three brushed and etched aluminum accents with whatever you choose on them....if you build your car to have some power to back it up... name it "crusher"!

some more on the design- it is targeted at clean design with no clutter... i like clean, suave classy interiors like what youd find on a high end german car. picture james bond BMW with american lines... the design is purely american and will mesh well with the car...the design features are just a bit more aggressive in the sports car styling department..I want people to feel like they are getting into a ground based rocket with some class..the contours will be pronounced, and the door will form into the dash much more noticably, giving a cockpit feel in the interior.

good news however at another point... and a hint at the design... there is a "cove" built in to the door panel design i have now, that integrates the arm rest and the door pull. this cove is covered in leather on the design, and the leather shop just got back to me yesterday.... i will be able to custom match the leather tone on the doors with your exterior....or any other color youd want. if a 3 or more pieces were going into your car, so that i could have a recurring color accent, you could have a VERY slick looking two tone interior.....more on this later

throw me some figures that you would like to see for pricing -- realistically, i see the price per door panel set between 3-500..... id like to see it around 350 for a set of two. it will be well worth it, as im going through distributors that supply audi, bmw and the like with fabrics and leathers.... plan on porsche quality or higher interior panels.

welll ive got to jet for work.... keep the responses coming! and anyone with specific questions feel free to pm me... remember... YOU GUYS are the public team im going with...YOU, the OWNERS know more about what youd like to see on the interior than any design team from GM. so if theres something cool you think of as a general point.. throw it out here and i will see what i can to to integrate ideas into the design.

thanks again and ill keep you all updated. bye for now!

[XtinKt]

I would be willing to pay $800.00-$900.00 for the whole set up. A single piece for the T-Tops would be great.

Just another side note. Don't for get places for lED lights to help accent it during the night.

Another side note. I wouild also be interested in removing my rear seats. In favour of fiberglass with Subs behind each seat painted to match the exterior of the car. Similar to how the corvette does theirs on the Verts except they don't have subs behind the seats.
this.

I have very specific plans for my car, and if your going to fabricate multipiles of this stuff, it will save me a fortune.

Let me know if i can be of any help. :woo:

[third_shift|studios]

this sounds awesome! if what you say is what i heard-you're planning on a GTO/interior w/exterior colored highlights inside? that would be SWEET! sounds like you've really done some serious work-i hope your one-off car makes it to a show worthy of chip foose.

[steveo346]

plz post pics

[Pewter02Formula]

Nobody ever does this for Firebirds... :dunno: I've always thought GM's people spent a little more time on the ergonomics of the Camaro's interior than the Firebird's...

Still sounds really cool -- can't wait to see what you come up with!

[third_shift|studios]

add to the list: head rest's that ACTUALLY craddle your head.

[XtinKt]

As much as all of us LS1 owner are looking in the rearview mirror at the trail of dust we left our competition in, It would be nice to have a cool Rearview mirror as well.

(I'm just throwing crap out there now.)

:monkey:

[Orange99z28]

i'd be interested in this if the price is right. its pretty much exactly what i wanted to do anyway

[98_Formula]

this sounds awesome, hopefully the door panels and such would fit into a trans am/firebird as well?

and going along with the radio trim design, making a piece that would hold an IPOD and look factory would be awesome, so you could snap it in when ur driving and not ahve wires showing...

[Waveridr85]

bump for a good strat, very interested, probably my next mod

[XtinKt]

ttt

Any pics available yet. You got us interested don't stop posting

[Rokn Red]

XtinkT

Do you mind sending some pics of your car, I've been thinking about doing a twotone like effect on my Red WS6, but your avatar is too small.

Rokn

[Eric @ DMS]

Sounds interesting. Couple things to keep in mind...PICS!! Haha..sorry just had to follow suit.

At any rate, once you show pics, get a good feel for what the enthsiasts will pay. Price it too high (for the sake of making profits) and you may lose A LOT of potential customers. Good luck and I look forward to seeing the pics. :)

[wicked illusions]

re-design the door panels on the camaro to make it look more like 05' cars is a grat idea( Something like the WS6 have).I think billet knobs would be great idea.Thats what set of interiors especially if you like 2tone matching. Mba products whent out of bus. So nobody offers shift knobs like the one they did(engraved emblems). Billet mirror buttons,ebrake,volume control buttons for the stearing wheel...oh a sterio consol so you can fit a navigation syst.

Luis--

[vikingramair]

Thats the plan stan. The Trans am is my dream car. If i could have any car in the world it would be the trans am. Now to get it the way i like it...................

Amen to that !!!!

[graphicsgod]

My interior... :D.

http://i10.photobucket.com/albums/a122/graphicsgod/MyCamaro_inside-2.jpg

http://i10.photobucket.com/albums/a122/graphicsgod/MyCamaro_inside-1.jpg

http://i10.photobucket.com/albums/a122/graphicsgod/MyCamaro_inside-13.jpg

Rob

[third_shift|studios]

why leather on the shifter??? that just doesn't look right...but your interior is intense, man...

[MadSeason]

sweet dude but loose the shifter, just go all chrome or something

[graphicsgod]

why leather on the shifter??? that just doesn't look right...but your interior is intense, man...

Thanks man!

As for the shifter boot, it came with it. And it looks just as weird without it.

Rob

[fromWS6toZ06]

another interested buyer... just need to see pics of your descriptions!

Please describe the 10lb bottle relocation idea!

[XtinKt]

That shifter looks like a limp dick with saggy balls

[1fastcamarosss11]

do have two different car mat in that car? thanks jeremy

[MadSeason]

That shifter looks like a limp dick with saggy balls

bout time someone came out and actually said it

['99 SLP#24]

Where is the person that started this thread? No word from him for a while???!!!?!?

[Silver02TA]

Nobody ever does this for Firebirds... :dunno: I've always thought GM's people spent a little more time on the ergonomics of the Camaro's interior than the Firebird's...

the Camaro's interior sucks huge balls compared to the Firebird's, dude.

[MadSeason]

the Camaro's interior sucks huge balls compared to the Firebird's, dude.

I've own both a 94 camaro and a 00 firebird. I find the door panels in a camaro are in a better position than the firebird and the gauge cluster is completely visable. the only other difference is the square vents compaired to the pontiacs circular one... so please elaborate how it sucks huge balls. it's basically 95% the same

[the Dragon]

I've own both a 94 camaro and a 00 firebird. I find the door panels in a camaro are in a better position than the firebird and the gauge cluster is completely visable. the only other difference is the square vents compaired to the pontiacs circular one... so please elaborate how it sucks huge balls. it's basically 95% the same

I haven't paid attention to the stock Camaro interior but I have seen many threads on various Forums about people "upgrading" to Firebird interior parts eg. the gauge cluster or stereo :shrug:

I wouldn't know since most everyone upgrades everything on their car from stock anyway :)

[graphicsgod]

the Camaro's interior sucks huge balls compared to the Firebird's, dude.

I agree and disagree. It's decent, but the two are very close in appereance that the argument is pointless to debate. I also prefer the T/A interior. Hence why I changed the doors. Wouldn't mind doing the dash, but I can live with the Camaro one.

do have two different car mat in that car? thanks jeremy

No, older and newer pics. The red one is from a year ago.

That shifter looks like a limp dick with saggy balls

LOL!!! You got a problem with my limp dick! Do ya :D!

I just felt like posting pics, since the original poster hasn't.

Rob

[XtinKt]

LOL Graphics. I'm just bustin your chops. To each his own. It doesn't really matter what i think anyways. As long as you like it thats all that matters.

[graphicsgod]

LOL Graphics. I'm just bustin your chops. To each his own. It doesn't really matter what i think anyways. As long as you like it thats all that matters.

Don't worry, I thought it was funny. Just bustin yours :D. For as much as I paid for the shifter and e-brake, I'd hope so ;)! MOMO shit ain't cheap, lol.

Rob

[chevyss1234]

hey did u ever get ure door panels made?