PDA

View Full Version : Wtf??????????????????trans Problems

BIG SS
10-31-2006, 06:20 PM
This Damn Car Of Mine Needs Its 6th Damn Trans Rebuild. What Is Going On? 3rd Gear Is Just Gone. Can Anyboby Tell Me What I Should Do? I Fly, But I Dont Dog My Trans
JonB
10-31-2006, 09:09 PM
I hope you don't keep going back to the same place to get it rebuilt cause they obviously don't know what there doing. What kind of power are you making?
Hi-Po
10-31-2006, 11:52 PM
This Damn Car Of Mine Needs Its 6th Damn Trans Rebuild. What Is Going On? 3rd Gear Is Just Gone. Can Anyboby Tell Me What I Should Do? I Fly, But I Dont Dog My Trans

first its in the wrong section. but thats A-O-K. What you mean... 3rd is just gone? m6 or a4? need alittle more info please...
SeVeReDiStOrTiOn
11-01-2006, 12:20 AM
Stop bringing it to AAMCO :lol:

I'm guessing it's a auto...try these guys.
http://www.rock-ontransmissions.com/
BIG SS
11-02-2006, 06:21 PM
ITS AN A4 TRANS. HERES WHAT GOES ON: I TAKE OFF FROM A LIGHT, IT GOES THRU FIRST, IT CHANGES TO SECOND, THEN IT SLIPS IN THIRD. SO BASICALLY, I MUST ACCELLERATE AT A DECENT SPEED BECAUSE IF I DONT GET IT UP TO ATLEAST 25 M.P.H. BY THE TIME IT TRIES TO GO TO THIRD, THEN IT WONT CATCH UNTIL I REV THE R.P.M.'s TO ABOUT 3500 SO I CAN ATLEAST COAST AT 40-50 M.P.H. UNTIL I HAVE TO GET THE RPM's UP TO KEEP MY SPEED UP. THE FREEWAY IS OUT OF THE QUESTION BECUASE I'M ALREADY RUNNING OR COASTING AT 3500 RPM's TO KEEP UP WITH CITY TRAFFIC. GAS SUCKER!!! ONLY REASON I HAVENT HAD IT FIXED YET IS OFCOURSE BECAUSE I DONT HAVE THE MONEY RIGHT NOW. ANY INPUT ANYBODY. THE PREVIOUS OWNERS DID TAKE IT TO 2 DIFFERENT PLACES.
shady milkman
11-02-2006, 06:26 PM
swap a built 4le60..i think thats the full name..my letters could be messed up..but yea just get a new tranny like eddy murphy...it sounds like you have a bum trans but could it be a pcm prob? maybe not shifting right or such? also did u have a shift kit on it?
BIG SS
11-03-2006, 09:44 AM
No Shift Kit
shady milkman
11-03-2006, 09:49 AM
man when u get ur trans fixed..deff pick up a b&m shift kit and throw that puppy on it..it will make a world of difference.
Sarge
11-03-2006, 11:08 AM
Sounds like your stall is slipping......what ATF Fluid you using....not synthetic I hope!
Tonik
11-03-2006, 12:53 PM
swap a built 4le60..i think thats the full name..my letters could be messed up..but yea just get a new tranny like eddy murphy...it sounds like you have a bum trans but could it be a pcm prob? maybe not shifting right or such? also did u have a shift kit on it?

4l60e

close though :nana:
shady milkman
11-03-2006, 01:08 PM
4l60e

close though :nana:

damn i always mix that shit up :brick: lol
Vince @ FLT
11-04-2006, 07:42 AM
Stop bringing it to AAMCO :lol:

I'm guessing it's a auto...try these guys.
http://www.rock-ontransmissions.com/
I think that they have some issues over there and from what I have heard are almost out of biz. Just a little FYI.
Big SS You should really look into a different builder I can not believe that you are having to put #7 in. Not to bash any of the posters here but I would never use the b&m shift kit. I have rebuilt many units that have had this kit in it and there are some issues with it. Just my 2cents. Vince
shady milkman
11-04-2006, 08:40 AM
I think that they have some issues over there and from what I have heard are almost out of biz. Just a little FYI.
Big SS You should really look into a different builder I can not believe that you are having to put #7 in. Not to bash any of the posters here but I would never use the b&m shift kit. I have rebuilt many units that have had this kit in it and there are some issues with it. Just my 2cents. Vince

hmm what shift kit do u recomend?
Vince @ FLT
11-04-2006, 02:03 PM
The transgo hd-2 kit along with a good quality rebuilt.
shady milkman
11-04-2006, 02:12 PM
The transgo hd-2 kit along with a good quality rebuilt.

thanks :nana: