Cam/springs??

[chad2000ss]

I have a 220-224 .581 114 cl cam, with comp 918 springs rated to a .600 lift. I have a bigger cam i want to install 231-237 595. 112+2. was wondering thats close to the max lift for the springs. Has anyone tried something like this or have an opinion. Thank you.

[Zboner]

should be fine. i run them and look at my cam im my sig

[nhraformula]

if you have close to 20k on the spings, change them out for some dual springs

[vettenuts]

918's will be fine, but if you have a lot of miles on them a fresh set might be in order. Also, measure your installed height with a valve spring micrometer, the lift capability of the spring is a function of the installed height not just the lift.

[BerryWS6]

Form what I have read when the 918's came out Comp rated them to a .625 lift then the 921's(there dual) came out and only would rate them at .650 lift. So Comp lowered the rated lift of the 918's to .600
I know people that run the 918's with .601/.605 lift cams and are fine. But they will have to change them out more often.
with that being said that cam will be fine with 918's