PDA

View Full Version : Here are the picts and vids of the H/C install.

SOMSS
10-15-2006, 07:46 PM
The three days went pretty smoothe, with only one sensor breaking (oil pressure switch) which we replaced. The headers went in without any real grief. The heads (Dart Pro) were ported and polished while I watched. boy are they beautiful. They used REV valves, Comp 918 springs, Comp Hi Tech push rods, ARP fasteners throughout, Comp OE lifters, LS2 timing chain, SLP ported LS6 oil pump (it idles at 65psi and runs at 80psi) and Cherry Red ceramic coated Kooks LT headers (which I watched being coated). Here are just a few of the picts and vids.
http://img.photobucket.com/albums/v339/SOMSS/06buildup/Dyno10-14-06-2.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/DSCN1747.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/DSCN1746.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/DSCN1714.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/porting.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/head.jpg
http://img.photobucket.com/albums/v339/SOMSS/06buildup/th_DSCN1748.jpg (http://smg.photobucket.com/albums/v339/SOMSS/06buildup/?action=view&current=DSCN1748.flv)
http://img.photobucket.com/albums/v339/SOMSS/06buildup/th_DSCN1726.jpg (http://smg.photobucket.com/albums/v339/SOMSS/06buildup/?action=view&current=DSCN1726.flv)
http://img.photobucket.com/albums/v339/SOMSS/06buildup/th_DSCN1719.jpg (http://smg.photobucket.com/albums/v339/SOMSS/06buildup/?action=view&current=DSCN1719.flv)
DaddySS
10-16-2006, 02:15 AM
Really nice, thanks for the update and Pics! Congrats!
ferocity
10-22-2006, 09:32 PM
Sounds really good.
josh110781
10-23-2006, 10:37 AM
what size cam is it. what are the specs on it
SOMSS
10-23-2006, 06:41 PM
what size cam is it. what are the specs on it

My cam is a custom Comp Cam 220/224 LSA 112 with secrete durations and XE-R lobes. PM me for more info.....
josh110781
10-24-2006, 05:19 AM
i just got done doing pretty much the samething on my trans am.i put cnc ported ls6 heads on with a 237/242,113 lsa, .603/.609 cam. and pacsetter lt with ory-pipe and magnaflow catback with full bolt ons. so i was just trying to get an idea on how much power i had so it should be close to yours.
SOMSS
10-27-2006, 04:33 PM
Yup, I'd say your probably right on what I'm making. I have a smaller cam than you but probably flow a little better thru the heads and my Kooks probably make a little more hp than the Pacesetters. So all in all I'd say your pushing at least as much hp as me. How does your car run and have you tuned it? You are definetely going to need a tune with that cam.
josh110781
10-30-2006, 05:08 AM
have not got it tuned yet but i plan to in the spring. i was just hoping to break the 400 horsepower mark at the rear. its not running to bad with out the tune i got it to idle pretty good. the sound this car makes is awesome the way it is at idle and at wot is crazy. i cant wait to have some fun next year
vettenuts
10-30-2006, 06:39 PM
Very similar flat torque curve to my Dart 205 curve with a smaller cam. Very nice :yup:

Did you swap out the Dart valve springs for the Comp 918's?