PDA

View Full Version : HSW wet kit help

silver99ss
10-10-2006, 01:58 PM
I just ordered a HSW wet kit and just wanted to know if changing to a colder plug is the only thing I need to do? (I run NGK tr55 right now)
Matt@HSW
10-11-2006, 08:15 AM
Should be about it, the NGK TR6s are a pretty popular plug to switch to.

Let me know if you have any other questions.

Thanks,
Matt
silver99ss
10-11-2006, 01:28 PM
Thanks!
mrr23
10-11-2006, 08:23 PM
it depends on how much you are going to use. up to 100hp, i would go one step colder (TR6). over 100hp and i'd go 2 steps (BP7EFS or autolite 103).

also, if you are a manual trans, a window switch is a good item to have.
silver99ss
10-12-2006, 10:43 AM
I don't need to change my timing? I'm only going to spray 75hp to start
Matt@HSW
10-12-2006, 03:37 PM
Stock timing (no tune or it has not been advanced any)? If it's stock you don't have to retard it any. If the timing has been advanced any via a PCM tune then yes, I would suggest pulling out any that you added.

Matt

I don't need to change my timing? I'm only going to spray 75hp to start
silver99ss
10-12-2006, 05:39 PM
no, stock engine tune. Thanks Matt