12 Bolt

[WS6ICK]

Which is better, Moser 12 bolt or Strange 12 bolt?

[99RedRagtop]

Strange, by far. the axles are better quality, and the machining tolerances are dead on. i've installed gears into Mosers' and the pinion depth was so far off, that the rear pinion bearing race had to be specially machined down to allow for a shim to be set under the bearing on the gear. there ya go. and as far as that goes, prices are within a few bucks.

[INMY01TA]

Strange. Moser's torque arm mount bites the big one. Downside is Strange you will prolly have to wait a month or two whereas Moser ships em right out.

[99RedRagtop]

2-3 weeks on Strange this time of year. definetly worth the wait!

[RainDownmyBlues]

Why not a Dana 60?

[bluethunder2]

Been running my Moser 12 bolt for a couple of years now without any problems. Was used on a 9 second car before I got it. Was easy to install. I like the way the torque arm bolts up. I think 4 short bolts are stronger than 2 long bolts.

[Json27]

I would have to agree with most everyone, and say go with the strange. I have heard alot of good talk about the strenght of the axles.